Journals →  Chernye Metally →  2020 →  #8 →  Back

Rolling and Other Metal Forming Processes
ArticleName Hot plastic deformation of heat-resistant austenitic AISI 310S steel. Part 1. Simulation of flow stress and dynamic recrystallization
ArticleAuthor A. Yu. Churyumov, A. V. Pozdnyakov, T. A. Churyumova, V. V. Cheverikin
ArticleAuthorData

National University of Science and Technology “MISiS” (Moscow, Russia):

A. Yu. Churyumov, Cand. Eng., Associate Prof., Dept. of Nonferrous Metallurgy, e-mail: churyumov@misis.ru
A. V. Pozdnyakov, Cand. Eng., Associate Prof., Dept. of Nonferrous Metallurgy
V. V. Cheverikin, Cand. Eng., Leading Resarcher


A. A. Bochvar High-technology Scientific Research Institute for Inorganic Materials (Moscow, Russia):

T. A. Churyumova, Researcher

Abstract

Model of the hot deformation behavior of high-temperature resistant AISI 310S steel was conducted using thermomechanical simulator Gleeble 3800 in the range of the temperatures of 900–1200 ºC, and in the range of the strain rates of 0,1–10 s–1, and at the strain up to 1. It was shown that the process of dynamic recrystallization, proceeding above a temperature of 1100 ºС, leads to a significant decrease in the average grain size to 15–25 microns. The kinetics models of dynamic recrystallization and growth of recrystallized grain were constructed. Verification of the constructed models by calculations using the finite element method showed their high accuracy and the possibility of application for predicting the microstructure in industrial conditions.

This work was financially supported by the Russian Science Foundation (project No. 18-79-10153).

keywords Hot deformation, modeling, microstructure, AISI 310 steel, dynamic recrystallization
References

1. Elwazri A. M., Essadiqi E., Yue S. Kinetics of metadynamic recrystallization in microalloyed hypereutectoid steels. ISIJ International. 2004. Vol. 44, Iss. 4. pp. 744–752.
2. Tripathy H., Vidhyashree S., Sudha C., Raju S. Kinetics of static recrystallization and strain induced martensite formation in low carbon austenitic steels using impulse excitation technique. Materials Today: Proceedings. 2000. Vol. 27. Part 3. pp. 1962–1366.
3. Irani M., Lim S., Joun M. Experimental and numerical study on the temperature sensitivity of the dynamic recrystallization activation energy and strain rate exponent in the JMAK model. Journal of Materials Research and Technology. 2019. Vol. 8, Iss. 2. pp. 1616–1627.
4. Lei X., Huang J., Jin X., Chen S., Zhao X. Application of Johnson-Mehl-Avrami-Kolmogorov type equation in non-isothermal phase process: Re-discussion. Materials Letters. 2017. Vol. 181. pp. 240–243.
5. Shen G., Semiatin S. L., Shivpuri R. Modeling microstructure development during the forging of Waspaloy. Metallurgical and Materials Transactions A. 1995. Vol. 26. pp. 1795–1803.
6. Brand A. J., Karhausen K., Kopp R. Microstructural simulation of nickel base alloy Inconel 718 in production of turbine discs. Materials Science and Technology. 1996. Vol. 12, Iss. 11. pp. 963–969.
7. Xu Y., Birnbaum P., Pilz S., Zhuang X., Zhao Z. et al. Investigation of constitutive relationship and dynamic recrystallization behavior of 22MnB5 during hot deformation. Results in Physics. 2019. Vol. 14. 102426.
8. Xu X., Li J., Li W., Liu Q., Liu D. et al. Experimental and theoretical study on static recrystallization of a low-density ferritic steel containing 4 mass% aluminum. Materials & Design. 2019. Vol. 180. 107924.
9. Chen L., Sun W., Lin J., Zhao G., Wang G. Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process. Results in Physics. 2019. Vol. 12. pp. 784–792.

10. Sychkov A. B., Moller A. B., Nazarov D. V., Kamalova G. Y., Malashkin S. O. Simulation of structure formation in shaped rolled steel in the process of its heat treatment. Metallurgist. 2018. Vol. 62, Iss. 3-4. pp. 193–202.
11. Chabbi L. Simulation of microstructure and mechanical properties in section rolling. Chernye Metally. 2017. No. 9. pp. 57–62.
12. Choe J. I. Constitutive relations for determining the critical conditions for dynamic recrystallization behavior. The Physics of Metals and Metallography. 2016. Vol. 117, Iss. 4. pp. 364–370.
13. Gorbachev I. I., Pasynkov A. Yu., Popov V. V. Simulation of the effect of hot deformation on the austenite grain size of low-alloyed steels with carbonitride hardening. Physics of Metals and Metallography. 2018. Vol. 119, Iss. 6. pp. 551–557.
14. Du S., Chen S., Song J. Dynamic recrystallization kinetics and microstructural evolution for LZ50 steel during hot deformation. Journal of Materials Engineering and Performance. 2016. Vol. 25, Iss. 9. pp. 3646–3655.
15. Sun F., Zhang D. Q., Cheng L., Zheng P., Liao D. Microstructure evolution modeling and simulation for dynamic recrystallization of Cr12MoV die steel during hot compression based on real metallographic image. Metals and Materials International. 2019. Vol. 25, Iss. 4. pp. 966–981.
16. Yin F., Hua L., Mao H., Han X., Qian D. et al. Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation. Materials & Design. 2014. Vol. 55. pp. 560–573.
17. Khomutov M. G., Churyumov A. Yu., Pozdnyakov A. V., Voitenko A. G., Chereshneva A. A. Simulation of the kinetics of dynamic recrystallization of alloy KhN55MBYu-VD during hot deformation. Metal Science and Heat Treatment. 2019. Vol. 60. No. 9–10. pp. 606–610.
18. Jina Z., Lia K., Wua X., Dong H. Modelling of microstructure evolution during thermoplastic deformation of steel by a finite element method. Materials Today: Proceedings. 2015. Vol. 2. pp. 460–465.
19. Dub V., Churyumov A., Rodin A., Belikov S., Barbolin A. Prediction of grain size evolution for low alloyed steels. Results in Physics. 2018. Vol. 8. pp. 584–586.
20. Mortezaie A., Shamanian M. An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel. International Journal of Pressure Vessels and Piping. 2014. Vol. 116. pp. 37–46.
21. Tavares S. S. M., Moura V., Costa V. C., Ferreira M. L. R., Pardal J. M. Microstructural changes and corrosion resistance of AISI 310S steel exposed to 600–800 °C. Materials Characterization. 2009. Vol. 60, Iss. 6. pp. 573–578.
22. Churyumov A. Y., Khomutov M. G., Tsar’kov A. A., Pozdnyakov A. V., Solonin A. N. et al. Study of the structure and mechanical properties of corrosion-resistant steel with a high concentration of boron at elevated temperatures. Physics of Metals and Metallography. 2014. Vol. 115. pp. 809–13.
23. Ghazani M. S., Eghbali B. Characterization of the hot deformation microstructure of AISI 321 austenitic stainless steel. Materials Science and Engineering: A. 2018. Vol. 730. pp. 380–390.
24. Cai Z., Ji H., Pei W., Tang X., Huang X. et al. Hot workability, constitutive model and processing map of 3Cr23Ni8Mn3N heat resistant steel. Vacuum. 2019. Vol. 165. pp. 324–336.
25. Hao Y., Liu W., Liu Z. Microstructure Evolution and Strain-Dependent Constitutive Modeling to Predict the Flow Behavior of 20Cr – 24Ni – 6Mo Super-Austenitic Stainless Steel During Hot Deformation. Acta Metallurgica Sinica (English Letters). 2018. Vol. 31. pp. 401–414.

Language of full-text russian
Full content Buy
Back