Журналы →  Obogashchenie Rud →  2019 →  №6 →  Назад

Название Mechanical properties of briquettes of chromic concentrates
DOI 10.17580/or.2019.06.06
Автор Babailov N. A., Loginov Yu. N., Polianskiy L. I.
Информация об авторе

Institute of Engineering Science, Ural Branch of RAS (Ekaterinburg, Russia):

Babailov N. A., Senior Researcher, Candidate of Engineering Sciences, Senior Researcher, n.a.babailov@urfu.ru


Ural Federal University (Ekaterinburg, Russia):
Loginov Yu. N., Professor, Doctor of Engineering Sciences, j.n.loginov@urfu.ru


«Spidermash» LLC (Ekaterinburg, Russia):
Polianskiy L. I., Director, info@spidermash.ru


This work covers the manufacture of metallurgical briquettes used in the production of ferrochrome. The physical and mechanical properties of such briquettes, made of chrome concentrates using liquid glass as a binder, were studied in laboratory conditions. The following technical indicators were established: density, dropping strength, compressive strength, and residual moisture of the briquettes. These properties were identified for briquettes immediately after pressing and for briquettes subjected to drying and aging. A nonlinear regression analysis was performed to describe the properties of the briquettes for the following factors: binder content (liquid glass, in the range of 0 to 10 %); metallurgical dust content (in the range of 0 to 40 %) and moisture content in the mixture prepared for briquetting (2 to 8 %). The pressing (briquetting) pressure in the range of up to 200 MPa is an important factor. In the manufacture of such briquettes, the areas of pressing pressures of 25 to 50 and 100 to 200 MPa were investigated. It has been established that their properties are well described by power functions. The least squares method was used to determine the coefficients of the nonlinear regression equation. The equations of dependence were obtained for the physical and mechanical properties of wet, dry, and aged briquettes. The quality assessment for the regression model designed was performed using the standard procedures: the determination coefficient and the mean relative error were found. The resulting models may be used to assess the strength of briquettes in transportation, as well as briquetting process parameters.
The work was carried out under the theme No. 0391-2016-0001 (AAAA-A18-118020790140-5) and with partial financial support of the resolution No. 211 of the Government of the Russian Federation, contract No. 02.A03. 21. 0006.

Ключевые слова Briquette, chrome concentrate, liquid glass, density, impact strength, compressive strength, moisture content, multiple nonlinear regression
Библиографический список

1. Huber-Kasberger H., Fleischanderl A., Hötzinger S. Briquetting of ferrous fines — saving resources, creating value. Proc. of the iron and steel technology conference AISTech17. 8–11 May 2017, Nashville, Tennessee, USA. Vol. 1. pp. 973–978.
2. Wang Z., Xu A.-J., He D.-F. Influence factors of compressive strength of stainless steel dust pellets by cold bonded briquetting. Journal of Iron and Steel Research. 2015. Vol. 27, Iss. 5. pp. 25–29. DOI: 10.13228/j.boyuan.issn1001-0963.20140114.
3. Nath S. K., Rajshekar Y., Alex T. C., Venugopalan T., Kumar S. Evaluation of the suitability of alternative binder to replace OPC for iron ore slime briquetting. Transactions of the Indian Institute of Metals. 2017. Vol. 70, Iss. 8. pp. 2165–2174. DOI: 10.1007/s12666-017-1038-5/
4. Jodkowski M., abaj J., Brzóska J., Jama D. Binder fraction reduction in non-ferrous metals concentrates briquetting process. Metalurgija. 2016. Vol. 55, Iss. 4. pp. 694–696.
5. Mohanty M. K., Mishra S., Mishra B., Sarkar S., Samal S. K. A novel technique for making cold briquettes for charging in blast furnace. IOP Conference Series: Materials Science and Engineering. 2016. Vol. 115, Iss. 1. Paper 012020. DOI: 10.1088/1757-899X/115/1/012020.
6. Kuskov V., Kuskova Ya., Udovitsky V. Effective processing of the iron ores. E3S Web Conf. 2017. Vol. 21. II International innovative mining symposium. Section: Environment problems in mining regions. DOI: 10.1051/e3sconf/20172102010.
7. Kuskov V., Kuskova Ya. Research of physical and mechanical properties of briquettes, concentrated from loose high-grade iron ores. 17th International multidisciplinary scientific geoconference SGEM 2017. Albena, Bulgaria, 29 June–5 July 2017. Vol. 17, Iss. 11. pp. 1011–1016. DOI: 10.5593/sgem2017/11/S04.129.
8. Avdokhin V. М. Mineral processing basics. Мoscow: MSU Publishing House, 2006. 417 p.
9. Ray C. R., Sahoo P. K., Rao S. S. Strength of chromite briquettes and its effect on smelting of charge chrome / ferro chrome. Proc. of INFACON XI «Innovations in ferro alloys industry». New Delhi, India, 18–21 February 2007. pp. 63–66.
10. Maimur B. N., Khudyakov А. Yu., Petrenko V. I., Vashchenko S. V., Bayul К. V. Briquetting the metallurgical raw materials. The actual continuity and development ways of the method. Chernaya Metallurgiya. Byulleten' nauchnotekhnicheskoy i ekonomicheskoy informatsii. 2016. No. 1. pp. 74–82.
11. Vashchenko S. V., Khudyakov А. Yu., Bayul К. V., Semenov Yu. S. Development of scientific and methodological approach to the selection of briquetting charge composition and its properties. Stal'. 2018. No. 8. pp. 2–6.
12. Letimin V. N., Makarova I. V., Vasileva М. S., Nasyrov Т. М. Analysis of the ways for the disposal of gas cleaning dust and sludge at the metallurgical enterprises. Teoriya i Tekhnologiya Metallurgicheskogo Proizvodstva. 2015. No. 1. pp. 82–86.
13. Galevskiy G. V., Rudneva V. V., Chernovskiy G. N. The use of silica-containing dust of metallurgical silicon electrofusion and high-silicon ferroalloys in the production of silicon carbide. Vestnik Gorno-metallurgicheskoy Sektsii Rossiyskoy Akademii Estestvennykh Nauk. Otdelenie Metallurgii. 2017. No. 39. pp. 115–135.
14. Nikitchenko T. V., Polyakov A. S., Timofeeva A. S., Chermenev E. A. The improvement in the strength of the hot briquetted iron due to the variation of its shape. Chernaya Metallurgiya. Byulleten' nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2017. No. 11. pp. 52–57.
15. Lvovskiy Е. N. Statistical methods for constructing empirical formulas. Мoscow: Vysshaya Shkola, 1988. 239 p.

Language of full-text русский
Полный текст статьи Получить