Journals →  Non-ferrous Metals →  2019 →  #2 →  Back

LIGHT METALS, CARBON MATERIALS
ArticleName Electrochemical characterization of the liquid aluminium bipolar electrode for extraction of noble metals from spent catalysts
DOI 10.17580/nfm.2019.02.04
ArticleAuthor Yasinskiy A. S., Padamata Sai Krishna, Polyakov P. V., Varyukhin D. Yu.
ArticleAuthorData

School of Non-Ferrous Metals and Materials Science, Siberian Federal University, Krasnoyarsk, Russia:

A. S. Yasinskiy, Assistant Prof., e-mail: ayasinskiykrsk@gmail.com
Sai Krishna Padamata, PhD Student, Assistant, e-mail: saikrishnapadamata17@gmail.com
P. V. Polyakov, Prof., e-mail: p.v.polyakov@mail.ru
D. Yu. Varyukhin, Master Student

Abstract

Regularities of the cathodic and the anodic behaviour of aluminium on tungsten in halide melts are investigated. The study of such systems is relevant in connection with the prospects for their use as bipolar electrodes for efficient extraction of noble metals from spent petrochemical Al2O3-based catalysts by the electrometallurgical method with associated production of high-purity aluminium and oxygen. Stationary and non-stationary polarization curves were obtained for the reduction and the oxidation of aluminium in molten NaCl – KCl + 5 wt.%AlF3 and 1.3KF – AlF3 systems at 700–850 oC (973–1123 K) in the range of current densities from 0.01 to 1.5 A·cm–2 and in the range of potential sweep rates from 0.01 to 5 V·s–1. Electrochemical characterization of the electrode showed that electroactive particles in chloride-based melts have higher diffusion coefficients (in comparison with fluoride melt) due to the high concentration of Na(I) and K(I) cations, low density and viscosity of the melt. Electrochemical dissolution and reduction of aluminium in both chloride-based and fluoride melts are quasi-reversible diffusion-controlled processes complicated by several parallel phenomena. Cathodic reduction of Al(III) in both studied melts occurs at high overvoltages (more than 200 mV at 0.1 A·cm–2) with the limiting current densities of 0.3–0.4 A·cm–2 at 800 oC. The cathodic reduction of Na(I) starts in chloride-based melts at the potential of –0.5 – (–0.7) V relative to Al reference electrode; the reduction of K(I) in both studied melts starts at –1.0 – (–1.2) V. In general, the kinetic parameters of the processes show that the extraction in two-sectioned cell can be beneficially performed at 800 oC with high current densities, and the liquid aluminium bipolar electrode seems to be the promising solution.

keywords Bipolar electrode, metal refining, high-purity aluminium, platinum group metals, catalyst processing, polarization curves, kinetics of electrode processes, electrolysis of melts
References

1. Akcil A., Vegliò F., Ferella F., Okudan M. D., Tuncuk A. A Review of Metal Recovery From Spent Petroleum Catalysts and Ash. Waste Management. 2015. Vol. 45. pp. 420–433.
2. Peng Z., Li Z., Lin X., Tang H., Ye L., Ma Yu., Rao M., Zhang Y., Li G., Jiang T. Pyrometallurgical Recovery of Platinum Group Metals from Catalysts. JOM. 2017. Vol. 69, Iss. 9. pp. 1553–1562.
3. Ding Y., Zhang S., Liu B., Zheng H., Chang C.-C., Ekberg C. Recovery of Precious Metals from Electronic Waste and Spent Catalysts: A review. Resources, Conservation and Recycling. 2019. Vol. 141. pp. 284–298.
4. Kolliopoulos G., Balomenos E., Giannopoulou L., Yakoumis I., Panias D. Behavior of Platinum Group Metals during Their Pyrometallurgical Recovery from Spent Automotive Catalysts. Open Acces s Library Journal. 2014. Vol. 1, Iss. 5. pp. 1–9.
5. Liu C., Sun S. C., Zhu X. P., Tu G. F., Zhang J. Y. Recovery of Platinum from the Spent Auto-Catalysts by Pyrometallurgy. IOP Conference Series: Materials Science and Engineering. 2019. Vol. 479. 012058. DOI: 10.1088/1757-899X/479/1/012058.

6. Fujima K., Morimoto T., Itoigawa H., Becchaku D. Development of a Process for Recycling Platinum Group Metals Using Molten Alkali Metal Chlorides. Journal of the Japan Institute of Metals and Materials. 2017. Vol. 81, Iss. 4. pp. 168–177.
7. You G., Fang W., Li Q., Ma Y., Yang X., Yang H. Study on Enrichment Method Of Platinum, Palladium And Rhodium In Spent Auto-Catalysts. Yejin Fenxi/Metallurgical Analysis. 2016. Vol. 36, Iss. 5. pp. 7–11.
8. Yoshimura A., Matsuno Y. A Fundamental Study of Platinum Recovery from Spent Auto-Catalyst Using “Dry Aqua Regia”. Journal of the Japan Institute of Metals and Materials. 2019. Vol. 83, Iss. 1. pp . 23–29.
9. Ding Y., Zheng H., Li J., Zhang S., Liu B., Ekberg C., Jian Z. Recovery of Platinum from Spent Petroleum Catalysts: Optimization Using Response Surface Methodology. Metals. 2019. Vol. 9, Iss. 3. p . 354. DOI: 10.3390/met9030354.
10. Okada T., Taniguchi Y., Nishimura F., Yonezawa S. Solu bilization of Palladium in Molten Mixture of Sodium Borates and Sodium Carbonate. Results in Physics. 2019. Vol. 13. 102281. DOI: 10.1016/j.rinp.2019.102281.
11. Dong H., Zhao J., Tong W., Cui H., Wu Y. Concentrating Pt from a Spent Alumina Carrier Catalyst by a Roast-leach Process. Metallurgical Research & Technology. 2019. Vol. 116, Iss. 2. p. 204. DOI: 10.1051/metal/2018115.
12. Belov S. F., Igumnov M. S., Lovchinovsky I. Yu. Electrochemical Method for Processing of Desactivated Al-Pd Catalysts in Fabrication Of Primary Aluminium. Tsvetnye Metally. 1997. No. 5. pp. 46–48.
13. Belov S. F., Igumnov M. S., Lovchinovsky I. Yu. Electrochemical Technique for Processing of Desactivated Aluminium-Palladium Catalysts During Fabrication of Pure Aluminium And Palladium Concentrate. Tsvetnye Metally. 1997. No. 6. pp. 39–41.
14. Belov S. F., Igumnov M. S., Lovchinovsky I. Yu. The influence of heat treatment on the phase composition of Al – Pd catalysts and leaching of palladium from them. Izvestiya VUZov. Tsvetnaya metallurgiya. 1985. No. 4. pp. 63–67.
15. Polyakov P. V., Klyuchantsev A. B., Yasinskiy A. S., Popov Y. N. Conception of “Dream Cell” in Aluminium Electrolysis. TMS Light Metals. 2016. pp. 283–288
16. Padamata S. K., Yas inskiy A. S., Polyakov P. V. Electrolytes and its Additives Used in Aluminium Reduction Cell: a Review. Metallurgical Research & Technology. 2019. Vol. 116, Iss. 4. p. 410. DOI: 10.1051/metal/2018136.
17. Ru Patent No. 268947 5. App aratus for high purity aluminium production with carbon-free anodes and method of its implementation. Yasinskiy A. S., Polyakov P. V., Popov Yu. N., Polyakov A. A., Padamata S. K. Applied: 12.07.2018, Published: 28.05.2019, Bull No. 16.
18. Yasinskiy A. S., Padamata S. K., Polyakov P. V., Vinogradov O. O. Anodic Process on Aluminium Bronze in Low-Temperature Cryolite-Alumina Melts and Suspensions. Tsvetnye Metally. 2019. No. 9. pp. 42–49. DOI: 10.17580/tsm.2019.09.07.
19. Yasinskiy A. S., Padamata S. K., Polyakov P. V., Samoilo A. S., Suzdaltsev A. V., Nikolaev A. Yu. Electrochemical behaviour of Cu – Al oxygen–evolving anodes in low–temperature flu oride melts and suspensions. Minerals, Metals and Materials Series: Light metals. 2020. (In press).
20. Xu Y., Jiao H., Wang M., Jiao S. Direct Preparation of V – Al Alloy by Molten Salt Electrolysis of Soluble NaVO3 on a Liquid Al Cathode. Journal of Alloys and Compounds. 2019. Vol. 779. pp. 22–29.
21. Kan H.-M., Wang Z.-W., Wang X.-Y., Zhang N. Electrochemical Deposition of Aluminium on W Electrode from AlCl3 – NaCl Melts. Transactions of Nonferrous Metals Society of China. 2010. Vol. 20, Iss. 1. pp. 158–164.
22. Nik olaev A. Yu., Suzdaltsev A. V., Zaikov Yu. P. Electrowinning of Aluminium and Scandium from KF – AlF3 – Sc2O3 Melts for the Synthesis of Al-Sc Master Alloys. Journal of The Electrochemical Society. 2019. V ol. 166, Iss. 8. pp. D252–D257.
23. Filatov A. A., Pershin P. S., Suzdaltsev A. V., Nikolaev A. Yu., Zaikov Yu. P. Synthesis of Al – Zr Master Alloys via the Electrolysis of KF – NaF – AlF3 – ZrO2 Melts. Journal of The Electrochemical Society. 2018. Vol. 162, Iss. 2. pp. E28–E34.
24. Wei Z., Peng J., Wang Y., Liu K., Di Y., Sun T. Cathodic Process of Aluminium Deposition in NaF – AlF3 – Al2O3 Melts with Low Cryolite Ratio. Ionics. 2019. Vol. 25, Iss. 4. pp. 1735–1 745.
25. Khramov A. P., Shurov N. I. Modern Views on the Composition of Anionic Oxy-Fluoride Complexes of Aluminium and Their Rearrangement during the Electrolysis of Cryolite-Alumina Melts. Russian Metallurgy (Metally). 2014. No. 8. pp. 581–592.
26. Nikolaev A. Yu., Suzdaltsev A. V., Polyakov P. V., Zaikov Yu. P. Cathode Process at the Electrolysis of KF – AlF3 – Al2O3 Melts and Suspensions. Journal of The Electrochemical Society. 2017. Vol. 164, Iss. 8. pp. H5315–H5321.
27. Liu D., Yang Zh., Li W., Wang S., Wang Sh. Cathodic Behavior of Graphite in KF-AlF3-based Melts with Various Cryolite Ratios. Journal of Solid State Electrochemistry. 2011. Vol. 15, Iss. 3. pp. 61 5–621.
28. Liu D., Yang Zh., Li W. J. Electrochemical Behavior of Graphite in KF – AlF3-Based Melt with Low Cryolite Ratio. Journal of the Electrochemical Society. 2010. Vol. 157, Iss. 7. pp. D417–D421.
29. Janz G. J., Tomkins R. P. T., Allen C. B., Downey J. R., Gardner G. L., Krebs U., Singer S. K. Molten Salts: Vol. 4, Pt. 2, Chlorides and Mixtures — Electrical Conductance, Density, Viscosity, and Surface Tension Data. Journal of Physical and Chemical Reference Data. 1975. Vol. 4, Iss. 4. pp. 871–1178.

Full content Electrochemical characterization of the liquid aluminium bipolar electrode for extraction of noble metals from spent catalysts
Back