Журналы →  Non-ferrous Metals →  2019 →  №1 →  Назад

Название Influence of Na2CO3 and CaCO3 additions on the aluminate slag formation during a single-stage reducing roasting of red mud
DOI 10.17580/nfm.2019.01.03
Автор Anisonyan K. G., Kopyev D. Yu., Olyunina T. V., Sadykhov G. B.
Информация об авторе

A. A. Baikov Institute of Metallurgy and Material Science, Russian Academy of Sciences, Moscow, Russia:

K. G. Anisonyan, Senior Researcher, e-mail: grikar84@mail.ru
D. Yu. Kopyev, Researcher
T. V. Olyunina, Senior Researcher
G. B. Sadykhov, Head of Laboratory, Chief Researcher


Red mud is an alumina production waste. Due to the absence of effective recycling technologies, red mud is practically not used and is stored in special sludge deposits, representing a serious technogenic threat for the environment and neighboring settlements. Tens of millions tons of red mud are sent to the dumps every year. More than 100 million tons of red mud has been piled up in Russia. High content of iron and aluminium in red mud requires a processing which provides an effective separation of these components and obtaining iron- and aluminium-containing products. The present paper contains the results of the investigations focused on developing a single-stage reducing roasting process with simultaneous production of cast iron and aluminate slag, the main aluminium-containing component of which is a water-soluble sodium aluminate. Forming of reguired slag composition is achieved by adding Na2CO3 and CaCO3 to a furnace charge in definite proportions. It was studied the influence of these additions on degree of aluminium extraction into solution during the aluminate slag leaching in an alkalescent aqueous medium. It has been determined that adding of 15% Na2CO3 and 20% CaCO3 provides the most complete aluminium extraction into solution during leaching the product of the red mud reducing roasting. At the same time, an incomplete aluminium extraction is associated with formation in the system of complex calcium aluminosilicates (helenite predominantly). The carried out study has showed a principle possibility of aluminate slag obtaining in the process of a red mud single-stage reducing roasting and subsequent aluminium extraction into solution by water leaching in an alkalescent aqueous medium.

The study was performed by a grant of the Russian Science Foundation (project No. 17-73-10414).

Ключевые слова Red mud, alumina production, reducing roasting, cast iron, aluminate slag
Библиографический список

1. Layner A. I., Eremin N. I., Layner Yu. A., Pevzner I. Z. Alumina production. Moscow : Metallurgiya, 1978. 344 p.
2. Trushko V. L., Utkov V. A., Bazhin V. Yu. Topicality and possibilities for complete processing of red mud of aluminous production. Zapiski Gornogo instituta. 2017. Vol. 227. pp. 547–553.
3. Ogorodnikova E. N., Nikolaeva S. K. Red mud, issues of storage and usage. Engineering-geological problems of the present time, and methods of their solution: collection of proceedings of research and practice conference. Moscow, 2017. pp. 284–288.
4. Pepper R. A., Couperthwaite S. J., Millar G. J. Comprehensive examination of acid leaching behaviour of mineral phases from red mud: recovery of Fe, Al, Ti, and Si. Minerals Engineering. 2016. Vol. 99. pp 8–18.
5. Davris P., Balomenos E., Panias D., Paspaliaris I. Selective leaching of rare earth elements from bauxite residue (red mud), using a functionalized hydrophobic ionic liquid. Hydrometallurgy. 2016. Vol. 164. pp 125–135.
6. Pyagay I. N., Kozhevnikov V. L., Pasechnik L. A., Skachkov V. M. Processing of alumina production red mud with recovery of scandium concentrate. Zapiski Gornogo instituta. 2016. Vol. 218. pp. 225–232.
7. Medvedev A. S., Khayrullina R. T., Kirov S. S., Suss A. G. Technical scandium oxide obtaining from red mud of Urals Aluminium Smelter. Tsvetnye metally. 2015. No. 12. pp. 47–52. DOI: 10.17580/tsm.2015.12.08.
8. Liu Z., Zong Y., Li H., Jia D., Zhao Z. Selectively recovering scandium from high alkali bayer red mud without impurities of iron, titanium and gallium. Journal of Rare Earths. 2017. Vol. 35, No. 9. p. 896.
9. Zhu X., Li W., Tang S., Zeng M., Bai P., Chen L. Selective recovery of vanadium and scandium by ion exchange with D201 and solvent extraction using P507 from hydrochloric acid leaching solution of red mud. Chemosphere. 2017. Vol. 175. pp. 365–372.
10. Loginova I. V., Shoppert A. A., Kyrchikov A. V., Ordon S. F., Medyankina I. S. Red muds of alumina production as high-ferriferous raw material for ferrous metallurgy. Stal. 2016. No. 1. pp. 67–70.
11. Sheshukov O. Yu., Mikheenkov M. A., Lobanov D. A., Ovchinnikova L. A., Vyaznikova E. A. Working through a technology of ferric oxide in red mud pyrometallurgical reduction. Actual problems of modern science, engineering and education. 2016. Vol. 1, No. 1 pp. 99–102.
12. Zinoveev D. V., Grudinskiy P. I. Recycling red mud of JSC Ural Aluminum Plant with the recovery of iron and obtaining construction materials. Key Engineering Materials. 2017. Vol. 743. pp. 331–337.
13. Zinoveev D. V., Diubanov V. G., Shutova A. V., Ziniaeva M. V. Recycling of Red Muds with the Extraction of Metals and Special Additions to Cement. Russian Metallurgy (Metally). 2015. No. 1. pp. 19–21.
14. Samouhos M., Taxiarchou M., Pilatos G., Tsakiridis P. E., Devlin E., Pissas M. Controlled reduction of red mud by H2 followed by magnetic separation. Minerals Engineering. 2017. Vol. 105. pp. 36–43.
15. Fujii A. L., dos Reis Torres D., de Oliveira Romano R. C., Cincotto M. A., Pileggi R. G. Impact of superplasticizer on the hardening of slag Portland cement blended with red mud. Construction and Building Materials. 2015. Vol. 101, Part 1. pp 432–439.
16. Anisonyan K. G., Kopyev D. Yu., Goncharov K. V., Sadykhov G. B. An investigation of a single-stage red mud reduction roasting process with the cast iron and aluminate slag production. Non-ferrous Metals. 2018. Vol. 44. pp. 18–23. DOI: 10.17580/nfm.2018.01.04.

Полный текст статьи Influence of Na2CO3 and CaCO3 additions on the aluminate slag formation during a single-stage reducing roasting of red mud