Journals →  Tsvetnye Metally →  2019 →  #5 →  Back

LIGHT METALS, CARBON MATERIALS
ArticleName The research of obtaining master alloys magnesium-gadolinium process by the method of metallothermic recovery
DOI 10.17580/tsm.2019.05.04
ArticleAuthor Savchenkov S. А.
ArticleAuthorData

St. Petersburg Mining University, Saint-Petersburg, Russia:

S. А. Savchenkov, Postgraduate Student, е-mail: savchenkov.ltc@bk.ru

Abstract

The article is devoted to the study of the process of synthesis of master alloys, the magnesium-gadolinium. Based on the analysis of diagrams of the state and requirements for fluxes for melting magnesium alloys, the composition of the salt mixture was chosen. Differential thermal analysis (DTA) determined the temperature ranges of thermal effects in the melting of components of the salt mixture KCl – NaCl – CaCl2 – MgCl2 – CaF2 – GdFand in the reduction of compounds of gadolinium magnesium. It is established that upon contact of the molten technological salt mixture, a complex compound of gadolinium Na5Gd9F32 is formed, which in the preparation of Mg – Gd master alloy is a precursor for the recovery of gadolinium. As a result of a series of experimental melting, the basic laws of the synthesis of magnesium-gadolinium master alloy from the selected technological salt mixture were revealed, the main factors of the metallothermic process affecting the degree of gadolinium recovery were determined. The necessary content of the alloying element in the master alloy is achieved by preliminary adjustment of the content of the initial compound of gadolinium fluoride in the technological salt mixture. The influence of technological parameters on the yield of gadolinium in the master alloy was determined on the basis of experimental melting. The maximum yield of gadolinium — 98.4%, is achieved by using a technological salt mixture of the composition KCl – NaCl – CaCl2 – MgCl2 – CaF2 – GdF3, intensive stirring of the melt at a holding time of 25–30 minutes and a temperature of at least 720 оC. The microstructure, chemical and phase composition of the obtained master alloys samples were investigated. It is established that the structure of the samples of the obtained magnesium-gadolinium master is dendrites of a solid solution of α-Mg, along the boundaries of which MgxGdy compounds are located.

keywords Magnesium master alloy, magnesium-gadolinium master alloy, synthesis of master alloys, magnesium-REM, metallothermic recovery
References

1. Lukyanova E. A., Rokhlin L. L., Dobatkina T. V., Korolkova I. G. Investigation of samarium solubility in a solid solution based on magnesium containing yttrium and gadolinium. Metally. 2012. No. 4. pp. 85–89.
2. Rokhlin L. L., Dobatkina T. V., Nikitina N. I., Tarytina I. E., Lukyanova E. A. Behavior at annealing of high-strength magnesium alloy IMV7-1 of Mg – Y – Gd – Zr system. Perspektivnye materialy. 2011. No. 6. pp. 53–58.
3. Rokhlin L. L., Lukyanova E. A., Dobatkina T. V., Aladjev N. A., Korolkova I. G. Phase equilibria in alloys of the system Mg – Y – Gd – Sm. Metally. 2012. No. 5. pp. 71–77.
4. Frolov A. V., Mukhina I. Y., Leonov A. A., Uridiya Z. P. Effect of rareearth metal alloying on the properties and structure of magnesium casting alloy of experimental composition of Mg – Zr – Zn – Y – Nd system. Trudy VIAM. 2016. No. 3. DOI: 10.18577/2307-6046-2016-0-3-3-3
5. Frolov A. V., Mukhina I. Y., Duyunova V. A., Uridiya Z. P. Influence of alloying elements and structural factors on the heat resistance of magnesium alloys. Trudy VIAM. 2015. No. 9. DOI: 10.18577/2307-6046-2015-0-9-7-7
6. Junxiu Chen, Lili Tan, Xiaoming Yu, Ke Yang. Effect of minor content of Gd on the mechanical and degradable properties of as-cast Mg – 2Zn – xGd – 0.5Zr alloys. Journal of Materials Science & Technology. 2019. Vol. 35, Iss. 4. pp. 503–511.
7. Jing Liu, Lixin Yang, Chunyan Zhang, Bo Zhang, Tao Zhang, Yang Li, Kaiming Wu, Fuhui Wang. Role of the LPSO structure in the improvement of corrosion resistance of Mg – Gd – Zn – Zr alloys. Alloys and Compounds. 2019. Vol. 782. pp. 648–658.
8. Yuling Xu, Felix Gensch, Zhen Ren, Karl Ulrich Kainer, Norbert Hort. Effects of Gd solutes on hardness and yield strength of Mg alloys. Progress in Natural Science: Materials International. 2018. Vol. 28, Iss. 6. pp. 724–730.
9. Shengnan Qian, Chuang Dong, Tianyu Liu, Ying Qin, Qing Wang, Yujuan Wu, Lidong Gu, Jianxin Zou, Xiangwen Heng, Liming Peng, Xiaoqin Zeng. Solute-homogenization model and its experimental verification in Mg – Gd-based alloys. Journal of Materials Science & Technology. 2018. Vol. 34, Iss. 7. pp. 1132–1141.
10. Nagarajan D. Anelasticity in cast Mg – Gd alloys. Materials Science and Engineering: A. 2017. Vol. 695. pp. 14–19.

11. Zhao L. Y., Yan H., Chen R. S., En-Hou Han. Study on the evolution pattern of grain orientation and misorientation during the static recrystallization of cold-rolled Mg – Zn – Gd alloy. Materials Characterization. 2019. Vol. 150. pp. 252–266.
12. Zhang Jinghuai, Liu Shujuan, Wu Ruizhi, Hou Legan, Zhang Milin. Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg – Gd and Mg – Y systems. Journal of Magnesium and Alloys. 2018. Vol. 6, Iss. 3. pp. 277–291.
13. Shuang Liu, Jing Zhang, Guoqiang Xi, Xin Wan, Dahao Zhang, Minghong Zhong, Chengbo Yang, Fusheng Pan. Effects of intermediate annealing on twin evolution in twin-structured Mg – Nd alloys. Journal of Alloys and Compounds. 2018. Vol. 763. pp. 11–17.
14. Marcello Cabibbo, Chiara Paoletti, Peter Minárik, Robert Král, Mária Zemková. Secondary phase precipitation and thermally stable microstructure refinement induced by ECAP on Mg – Y – Nd (WN43) alloy. Materials Letters. 2019. Vol. 237. pp. 5–8.
15. Xuan Liu, Zhiqiang Zhang, Qichi Le, Lei Bao. Effects of Nd/Gd value on the microstructures and mechanical properties of Mg – Gd – Y – Nd – Zr alloys. Journal of Magnesium and Alloys. 2016. Vol. 4, Iss. 3. pp. 214–219.
16. Kavalla R., Bazhin V. Yu. Isotropy of propеrties of magnesium alloy blanks. Zapiski Gornogo instituta. 2016. Vol. 222. pp. 828–832.
17. Wei Guobing, Peng Xiaodong, Li Junchen, Xie Weidong, Wei Qunyi. Structure Heredity Effect of Mg – 10Y Master Alloy in AZ31 Magnesium Alloy. Rare Metal Materials and Engineering. 2013. Vol. 42, Iss. 10. pp. 2009–2013.
18. Belkin G. I. Production of magnesium-zirconium alloys and alloys. Moscow : Metallurgizdat, 2001. 146 p.
19. Peng Xiaodonga, Li Junchena, Xie Sunyuna, Wei Guobina. Effects of Different State Mg – 5Sr – 10Y Master Alloys on the Microstructure Refinement of AZ31 Magnesium Alloy. Rare Metal Materials and Engineering. 2013. Vol. 42, Iss. 12. pp. 2421–2426.
20. Chengqi Wang, Ming Sun, Feiyan Zheng, Liming Peng, Wenjiang Ding. Improvement in grain refinement efficiency of Mg – Zr master alloy for magnesium alloy by friction stir processing. Journal of Magnesium and Alloys. 2014. Vol. 2. pp. 239–244.
21. Кosov Ya. I., Bazhin V. Yu. Synthesis of an aluminum – erbium master alloy from chloride-fluoride melts. Russian Metallurgy (Metally). 2018. No. 2. pp. 139–148.
22. Skachkov V. M., Yatsenko S. P. Preparation of Sc-, Zr-, Hf-, Y-ligatures based on aluminum by high-temperature exchange reactions in molten salts. Tsvetnye Metally. 2014. No. 3. pp. 22–26.
23. Savchenkov S. A., Bazhin V. Yu. Synthesis of magnesium master alloys in fluoride-chloride melts. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2018. Vol. 22, No. 5. pp. 214–224.
24. Popova E. A., Kotenkov P. V. Influence of the composition of the ligature Al – Zr – Y on the effect of Al – 4% Cu alloy modification. Melts. 2016. No. 2. pp. 185–192.
25. Endalkachey Mosisa, Bazhin V. Yu., Savchenkov S. A. Review on nano particle reinforced aluminum metal matrix composites. Research Journal of Applied Sciences. 2016. Vol. 1, No. 5. pp. 188–196.
26. Кosov Ya. I., Bazhin V. Yu. Preparation of novel Al – Er master alloys in chloride-fluoride melt. Materials Science Forum. 2018. Vol. 918. pp. 21–27.
27. Strategy of development of the metallurgical industry of the Russian Federation till 2020. Approved by order No. 150 of the Ministry of industry and trade of 18 March 2009. Moscow, 2009. — 133 p.
28. TU 48-4-271–91. The ligature is magnesium-neodymium. Technical conditions. Introduced 01.01.92.

Language of full-text russian
Full content Buy
Back