Journals →  Obogashchenie Rud →  2019 →  #2 →  Back

SECONDARY RAW MATERIAL PROCESSING
ArticleName Ways of utilization of mining wastes containing silicates
DOI 10.17580/or.2019.02.09
ArticleAuthor Yatsenko E. A., Goltzman B. M., Bulgakov A. G., Holschemacher K.
ArticleAuthorData

Platov South-Russian State Polytechnic University (NPI) (Novocherkassk, Russia):

Yatsenko E. A., Head of Chair, Doctor of Engineering Sciences, Professor, e_yatsenko@mail.ru
Goltzman B. M., Associate Professor, Candidate of Engineering Sciences, boriuspost@gmail.com

 

Leipzig University of Applied Sciences — HTWK Leipzig (Leipzig, Germany):
Bulgakov A. G., Professor, Doctor of Engineering Sciences, a.bulgakow@gmx.de
Holschemacher K., Professor, Doctor of Engineering Sciences, klaus.holschemacher@htwk-leipzig.de

Abstract

The availability of a large amount of mature mining waste, containing quartz and aluminosilicates, is, on the one hand, a negative environmental factor, but, on the other hand, represents a potential source of secondary raw materials for the production of building materials. In addition, the processing of mature tailings generated in the concentration of various ores is a significant contribution to the resource-saving low-water subsoil management technologies. Prospective technologies for recycling silicate wastes from the mining and processing industries are the processes for the production of building ceramics and porous glass (foam glass). The manufacture of foam glass is of particular interest because it enables producing high-demand products with high added value. The use of mature tailings in the production of porous glass materials is a relatively new area. Foam glass may be obtained both directly from mineral aluminosilicate raw materials, which form the basis of mature tailings, and with the use of various glass-containing additives to tailings, such as scrap glass. In addition to the tailings of processing plants, fly ash of thermal power plants, waste from incineration of solid household waste, and various types of slags may be used to prepare the charge for the production of foam glass. It is shown that the composition of the charge, the type of the pore-forming agent and the sintering temperature significantly affect the foam glass production process. Optimization of these parameters allows obtaining foam glass with the density of 200–300 kg/m3.
The work was performed at the South Russian State Polytechnical University (NPI) with the financial support of the Russian Science Foundation, Agreement No. 18-19-00455.

keywords Mining industry, waste recycling, silicate minerals, foam glass, pore-forming agents
References

1. Arsentiev V. A., Vaisberg L. A., Samukov A. D. Nonwaste production of mass use building materials out of volcanic rocks. Gornyi Zhurnal. 2014. No. 12. pp. 55–63.
2. Mikhaylova N. V. Ecological effect of granitic rocks processing screenings’ dust fractions utilization. Obogashchenie Rud. 2016. No. 6. pp. 57–62.
3. Trubetskoy K. N., Chanturiya V. A., Kaplunov D. R., Rylnikova M. V. Complex development of deposits and deep processing of mineral raw materials. Moscow: Nauka, 2010. 437 p.
4. Arsentyev V. А., Vaysberg L. А., Ustinov I. D. Trends in development of lawwater-consumption technologies and machines for finely ground mineral materials processing. Obogashchenie Rud. 2014. No. 5. pp. 3–9.
5. Kazantseva L. K., Yusupov T. S., Lygina T. Z., Shumskaya L. G., Tsyplakov D. S. Foam glass from mechanoactivated zeolite-poor rock. Glass and Ceramics. 2014. Vol. 70, Iss. 9–10. pp. 360–364.
6. Kazantseva L. K., Rashchenko S. V. Optimization of porous heat-insulating ceramics manufacturing from zeolitic rocks. Ceramics International. 2016. Vol. 42, Iss. 16. pp. 19250–19256.
7. Volland S., Vereshchagin V. Cellular glass ceramic materials on the basis of zeolitic rock. Construction and Building Materials. 2012. Vol. 36. pp. 940–946.
8. Manevich V. E., Subbotin R. K., Nikiforov E. A., Senik N. A., Meshkov A. V. Diatomite — siliceous material for the glass industry. Glass and Ceramics. 2012. Vol. 69, Iss. 5–6. pp. 168–172.
9. Ivanov K. S., Radaev S. S., Selezneva O. I. Diatomites in granular foam-glass technology. Glass and Ceramics. 2014. Vol. 71, Iss. 5–6. pp. 157–161.
10. Yatsenko E. A., Goltsman B. M., Ryabova A. V. Complex protection of pipelines using silicate materials based on local raw materials of the Far East. Materials Science Forum. 2019. Vol. 945. pp. 46–52.
11. Saakyan E. R. Multifunctional foam glasses from volcanic glassy rocks. Glass and Ceramics. 1991. Vol. 48, Iss. 1–2. pp. 3–5.
12. Shimono Y., Nishida M., Seki Y. Production of foam glass made from glassy volcanic ashes as main material resources. Yogyo Kyokai Shi. Journal of the Ceramic Society of Japan. 1987. Vol. 95, Iss. 5. pp.494–502.
13. Seki Y. Production of the shirasu rich foam glass in the system shirasu-glass-water glass. Yogyo Kyokai Shi. Journal of the Ceramic Society of Japan. 2005. Vol. 91, Iss. 8. pp. 367–374.

14. Brusatin G., Bernardo E., Scarinci G. Production of foam glass from glass waste. Sustainable Waste Management and Recycling: Glass Waste. Proceedings of the International conference. London, 14–15 September 2004. pp. 67–69.
15. Éidukyavichus K. K., Matselkene V. R., Balkyavichus V. V., Shpokauskas A. A., Laukaitis A. A., Kunskaite L. Yu. Use of cullet of different chemical compositions in foam glass production. Glass and Ceramics. 2004. Vol. 61, Iss. 3–4. pp. 77–80.
16. Liu Y., Chen W., Liu M. The effect of foaming temperature on the foam glass by using waste glass. Gongneng Cailiao. Journal of Functional Materials. 2016. Vol. 47. pp. 135–141.
17. Yatsenko E. A., Goltsman B. M., Smolii V. A., Yatsenko L. A. Perspective and experience of use of glass fraction of solid municipal waste in the production of silicate heatinsulating materials. Proceedings of IEEE International conference «Management of municipal waste as an important factor of sustainable urban development», WASTE 2018. 4–6 October 2018, St. Petersburg. pp. 46–48.

18. Bulgakov A., Erofeev V., Bogatov A., Smirnov V. Innovative production technology of binding and building composite materials on the basis of glass wastes. Insights and innovations in structural engineering, mechanics and computation. Ed. A. Zingoni. London: Taylor & Francis Group, 2016. pp. 1583–1586.
19. Erofeev V., Korotaev S., Bulgakov A., Tretiakov I., Rodin A. Getting fired material with vitreous binder using frame technology. Procedia Engineering. 2016. Vol. 164. pp. 166–171.
20. Bernardo E., Scarinci G., Hreglich S. Foam glass as a way of recycling glasses from cathode ray tubes. Glass Science and Technology. 2005. Vol. 78, Iss. 1. pp. 7–11.
21. Mear F., Yot P., Cambon M., Caplain R., Ribes M. Characterisation of porous glasses prepared from Cathode Ray Tube (CRT). Powder Technology. 2006. Vol. 162, Iss. 1. pp. 59–63.
22. Méar F., Yot P., Cambon M., Ribes M. Elaboration and characterisation of foam glass from cathode ray tubes. Advances in Applied Ceramics. 2005. Vol. 104, Iss. 3. pp. 123–130.
23. Chen B., Wang K., Chen X., Lu A. Study of foam glass with high content of fly ash using calcium carbonate as foaming agent. Materials Letters. 2012. Vol. 79. pp. 263–265.
24. Chen B., Luo Z., Lu A. Preparation of sintered foam glass with high fly ash content. Materials Letters. 2011. Vol. 65, Iss. 23–24. pp. 3555–3558.
25. Zhao Y., Ye J., Lu X., Liu M., Lin Y., Gong W., Ning G. Preparation of sintered foam materials by alkali-activated coal fly ash. Journal of Hazardous Materials. 2010. Vol. 174. pp. 108–112.
26. Gots V. I., Germash K. M. Influence of modifying admixtures on properties of foam glass obtained by using ashes resulting from incineration of household waste. Achieving sustainability in construction. Proceedings of the International conference. Dundee, Scotland, UK, 5–6 July 2005. pp. 67–73.
27. Xu B., Liang K. M., Cao J. W., Li Y. H. Preparation of foam glass ceramics from phosphorus slag. Advanced Materials Research. 2010. Vol. 105–106, Iss. 1. pp. 600–603.
28. Ding L., Ning W., Wang Q., Shi D. Preparation and characterization of glass-ceramic foams from blast furnace slag and waste glass. Material Letters. 2015. Vol. 141. pp. 327–329.
29. Ponsot I., Bernardo E. Self glazed glass ceramic foams from metallurgical slag and recycled glass. Journal of Cleaner Production. 2013. Vol. 59. pp. 245–250.
30. Liao Y. C., Huang, C. Y. Glass foam from the mixture of reservoir sediment and Na2CO3. Ceramics International. 2013. Vol. 38, Iss. 5. pp. 4415–4420.
31. Zhang S., Kang Z., Lu Q. Preparation of foam glass composite from iron ore tailing. Advanced Materials Research. 2011. Vol. 168–170. pp. 1653–1657.
32. Yin H., Ma M., Bai J., Li Y., Zhang S., Wang F. Fabrication of foam glass from iron tailings. Materials Letters. 2016. Vol. 185. pp. 511–513.
33. Yang Y., Wie Z., Chen Y.-L., Li Y., Li X. Utilizing phosphate mine tailings to produce ceramisite. Construction and Building Materials. 2017. Vol. 155. pp. 1081–1090.
34. Liu T., Lin C.-W., Liu J., Han L., Gui H., Li C., Zhou X., Tang H., Yang Q., Lu A. Phase evolution, pore morphology and microstructure of glass ceramic foams derived from tailings wastes. Ceramics International. 2018. Vol. 44, Iss. 12. pp. 14393–14400.
35. Liu T. Y., Tang Y., Li Z., Luo W. T., Lu A. X. Red mud and fly ash incorporation for lightweight foamed ceramics using lead-zinc mine tailings as foaming agent. Materials Letters. 2016. Vol. 183. pp. 362–364.
36. Luo Y., Zheng S. L., Ma S. H., Liu C. L., Wang X. H. Preparation of sintered foamed ceramics derived entirely from coal fly ash. Construction and Building Materials. 2018. Vol. 163. pp. 529–538.
37. Zhang Q., He F., Shu H. Preparation of high strength glass ceramic foams from waste cathode ray tube and germanium tailings. Construction and Building Materials. 2016. Vol. 111. pp. 105–110.
38. Xi C., Zheng F., Xu J. Preparation of glass-ceramic foams using extracted titanium tailing and glass waste as raw materials. Construction and Building Materials. 2018. Vol. 190. pp. 896–909.
39. Topala U., Aksan M. Phase stabilization of magnetite (Fe3O4) nanoparticles with B2O3 addition: a significant enhancement on the phase transition temperature. Journal of Magnetism and Magnetic Materials. 2016. Vol. 406. pp. 123–128.

Language of full-text russian
Full content Buy
Back