Журналы →  Obogashchenie Rud →  2019 →  №2 →  Назад

SECONDARY RAW MATERIAL PROCESSING
Название Ammonia autoclave technology for the processing of low-grade concentrates generated in flotation concentration of cupriferous sandstones
DOI 10.17580/or.2019.02.06
Автор Boduen A. Ya., Fokina S. B., Petrov G. V., Andreev Yu. V.
Информация об авторе

St. Petersburg Mining University (St. Petersburg, Russia):
Boduen A. Ya., Associate Professor, Candidate of Engineering Sciences, bodyen-anna@mail.ru
Fokina S. B., Assistant, Candidate of Engineering Sciences, fokina_sb@spmi.ru
Petrov G. V., Professor, Doctor of Engineering Sciences, petroff@spmi.ru

 

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):
Andreev Yu. V., Associate Professor, Candidate of Engineering Sciences

Реферат

Hydrometallurgical processing of tailings of enrichment of cupriferous sandstone will increase extraction of copper in technology and reduce the burden on the environment. The tailings sample of copper sandstones, which contained 5.14 % Cu, 83.9 g/t Ag and 3.5 g/t Re, was used for research. The mechanism and kinetic characteristics of the ammonia autoclave leaching of copper-containing tailings in the temperature range of 120 ÷ 180 °C and oxygen pressure of 0.2 ÷ 0.8 MPa are revealed. The parameters of the one-stage process are established, which allow to achieve the most complete extraction of copper, silver and rhenium into the solution. A technology has been developed for the hydrometallurgical processing of cupriferous sandstone enrichment tailings, which includes autoclave ammonia leaching and thermal decomposition of ammonia and allows to obtain commercial copper concentrate and regenerates ammonia.

Ключевые слова Cupriferous sandstone, tails, copper, autoclave oxidative leaching, ammonia leaching
Библиографический список

1. Ivanov A. I., Vartanyan S. S., Chernykh A. I., Volchkov A. G., Kuznetsov V. V., Seravina T. V. The state and prospects of development of mineral resources of copper, zinc and lead in Russia. Razvedka i Okhrana Nedr. 2016. No. 9. pp. 100–106.
2. On the state and use of mineral resources of the Russian Federation, 2015: State report. Moscow: Ministry of natural resources and environment of the Russian Federation, 2016. 344 p.
3. Ukraintsev I. V., Trubilov V. S., Klepikov A. S. Poor, substandard and technogenic raw materials as a promising source of copper production. Tsvetnye Metally. 2016. No. 10. pp. 36–42.
4. Eropkin Yu. I. Enrichment of mineralized sandstones. St. Petersburg: Nauka. 1999. 156 p.
5. Grau R., Saari J., Maksimov I. I., Egorova V. G., Kuznetsova I. A. The Udokan deposit copper ores processing technology development studies. Obogashchenie Rud. 2018. No. 1. pp. 21–25.
6. Chechel A. P. Academic history of the study of Udokan copper (1977–1990). Mezhdunarodnyi Zhurnal Prikladnykh i Fundamentalnykh Issledovaniy. 2015. No. 10. pp. 523–527.
7. Krylova L. N., Adamov E. V., Pivovarova T. A., Kondrateva T. F. Conditions of heap bacterial and chemical leaching of copper ore from Udokanskoe deposit. Tsvetnye Metally. 2011. No. 7. pp. 16–20.
8. Senchenko A. E., Kulikov Yu. V., Aksenov A. V. Process characteristics of Udokan copper deposit ores, defining the efficient processing flowsheet and prospective ways of the process improvement. Tsvetnye Metally. 2017. No. 10. pp. 35–48.
9. Aleksandrov P. V., Medvedev A. S., Imideev V. A., Berbenev A. O. Processing of Udokan copper sulphide concentrate by low-temperature roasting with sodium chloride. Tsvetnye Metally. 2018. No. 10. pp. 18–23.
10. Brichkin V. N., Vasilyev V. V., Nagornaya E. А., Gumenyuk A. M. Bauxite grade improvement through selective grinding. Obogashchenie Rud. 2017. No. 3. pp. 3–9.
11. Sizyakov V. М., Nazarov Yu. P., Brichkin V. N., Sizyakova E. V. Processing of aged dumped tailings of apatite-nepheline ores flotation. Obogashchenie Rud. 2016. No. 2. pp. 33–40.
12. Sizyakov V. M., Brichkin V. N. About the role of hydrafed calcium carboaluminates in improving the technology of complex processing of nephelines. Zapiski Gornogo Instituta. 2018. Vol. 231. pp. 292–298.
13. Yun A. B., Zakharyan S. V., Chen V. A., Karimova L. M., Terent’eva I. V. Study of the preservation of granules of rough copper concentrates obtained from the tailings of enrichment for chlorinating roasting. Novoe Slovo v Nauke i Praktike: Gipotezy i Aprobatsiya Rezultatov Issledovaniy. 2014. No. 10. pp. 83–88.
14. Zakharyan S. V., Karimova L. M., Terent’eva I. V., Chen V. A., Yun A. B. Leaching process of burnt rough copper concentrate in aqueous solution of sodium chloride and sulfuric acid. Khimicheskaya Tekhnologiya. 2014. Vol. 15, No. 12. pp. 733–737.
15. Yun A. B., Zakharyan S. V., Karimova L. M., Terent’eva I. V., Serikbay A. U. Researches on nitrate leaching of Zhezkazgan beneficiation plant rough copper concentrate from ores of current production of Corporation Kazakhmys LLP. Proceedings of the International scientific and practical conference «Innovations in complex processing of mineral raw materials» (Abishev Readings). Almaty: NTs KPMS RK, 2016. pp. 581–583.
16. Delgado E., Frías C., Cruces J. G. Copper plant startup: beyond design performance through process improvements implementation. Copper International Conference, December 1–4, 2013, Santiago, Chile. Vol. IV. pp. 25–42.
17. Sole K. C., Zárate G., Steeples J., Tinkler O., Robinson T. G. Global survey of copper solvent extraction operations and practices. Copper International Conference, December 1–4, 2013, Santiago, Chile. Vol. IV. pp. 137–148.
18. Muzawazi C., Petersen J. Heap and tank leaching of copper and nickel from a Platreef flotation concentrate using ammoniacal solutions. Canadian Metallurgical Quarterly. 2015. Vol. 54. pp. 296–303.
19. Woode M. Y., Acheampong M. A., Osei-Wusu Achaw. Optimal conditions for ammonia leaching of copper/chalcocite-rimmed pyrite. International Journal of Advanced Research. 2014. Vol. 2, Iss. 5. pp. 1132–1141.
20. Karimov K. A., Rogozhnikov D. A., Naboichenko S. S., Karimova L. M., Zakharyan S. V. Autoclave ammonia leaching of silver from low-grade copper concentrates. Metallurg. 2018. No. 8. pp. 53–57.
21. Radmehr V., Koleini S. M. J., Khalesi M. R., Mohammadi M. R. T. Ammonia leaching: A new approach of copper industry in hydrometallurgical processes. Journal of the Institution of Engineers. 2013. Vol. 94, Iss. 2. pp. 95–104.
22. Kayralapov E. T. Research and development of pyrohydrometallurgical processing technology of Zhezkazgan
region off-balance copper ores enrichment products: Dissertation for the degree of Candidate of Engineering Sciences. Moscow: Gintsvetmet, 2014. 138 p.
23. Solodenko A. A., Vasiliev V. V., Solodenko A. B., Serebryakov M. A. Study on the ammonia autoclave leaching applied to substandard copper concentrates in the Zhezkazgan deposit. Ustoychivoe Razvitie Gornykh Territoriy. 2018. Vol. 10, No. 2. pp. 270–280.
24. Levenspiel O. Chemical reaction engineering. 3rd ed. New York: Wiley, 1999. 684 p.

Language of full-text русский
Полный текст статьи Получить
Назад