Journals →  Chernye Metally →  2019 →  #4 →  Back

Tubemaking
ArticleName Obtaining steel tubular items of variable cross-section along their length
ArticleAuthor M. V. Kadach, A. N. Koshmin, Yu. V. Gamin, B. A. Romantsev
ArticleAuthorData

National University of Science and Technology “MISiS” (Moscow, Russia):

M. V. Kadach, Post-graduate, e-mail: stendek89@yandex.ru
A. N. Koshmin, Post-graduate, e-mail: madswom@yandex.ru
Yu. V. Gamin, Cand. Eng., Senior lecturer, e-mail: gamin910@gmail.com
B. A. Romantsev, Dr. Eng., Prof., e-mail: boralr@yandex.ru

Abstract

A process for production of steel tubular items of a variable cross-section along the length, based on the technology of longitudinal rolling in rolls with grooves of a variable profile, forming an eccentric pass, has been proposed. The items have a smoothly varying cross-sectional shape along the length from a flat-oval one at the ends to the cylindrical at the central section. The main axes of the ovals at the end sections are mutually perpendicular. These items can be used as components of a cooling jacket for heat-loaded flow paths of power plants. The possibility of using the proposed process to create the industrial technology for manufacturing tubes of a similar assortment used in the aerospace industry has been confirmed by experiments. According to the results of trial rolling, product samples were obtained, the geometrical dimensions of which meet the requirements for defect-free assembly of the cooling jacket.

keywords Tubular items of variable cross-section, longitudinal rolling, two-roll mill, periodic rolling, eccentric pass, cooling jacket, cooling channels, power plants
References

1. Dobrovolsky M. V. Liquid-fueled rocket engines. Design Basics: tutorial for institution of higher education. 2nd edition revised and enlarged. Edited by Yagodnikov D. A. Moscow: MGTU im. N. E. Baumana, 2006. 488 p.
2. Akimov V. M. et al. Theory and calculation of air-jet engines. Edited by Shlyakhtenko S. M. Moscow: Mashinostroenie, 1987. 568 p.
3. Bakulev V. I. et al. Theory, calculation and design of aircraft engines and power plants: tutorial. Edited by Sosunov V. A., Chepkin V. M. Moscow: MAI, 2003. 688 p.
4. Steelant J., Marini M., Pezella G., Reimann B., Chernyshev S. L., Gubanov A. A., Talyzin V. A., Voevodenko N. V., Kukshinov N. V., Prokhorov A. N., Neely A. J., Kenell C., Verstraete D., Buttsworth D. Numerical and Experimental Research on Aerodynamics of High-Speed Passenger Vehicle within the HEXAFLY-INT Project. Proceedings of 30th Congress of the International Council of the Aeronautical Sciences, Daejeon, 2016. ICAS 2016-0353. 2016. 17 p.
5. Aleksandrov V. Yu., Kukshinov N. V., Prokhorov A. N., Rudinskiy A. V. Analysis of the integral characteristics of HEXAFLY-INT facility module. Proceedings of the 21th International Space planes and hypersonic systems and technology conference, Xiamen, 2017. AIAA-2017-2179. 2017. 5 p.
6. Kazandzhan P. K., Tikhonov N. D., Yanko А. К. Aviation Engine Theory. Moscow: Mashinostroenie, 1983. 217 p.
7. Patent KR No. 20130134770. A cooling jacket for a combustion apparatus. An Sang Il, Youn Ju Seon, Baek Soon Bong. 31.05.2012.
8. Patent US No. 7373774. Enhanced performance torroidal coolant-collection manifold. Jim A. Clark, Mark Ricciardo. 20.05.2008.
9. Patent US No. 7051513. Rocket engine tubular chamber with single piece jacket. Terrence J. McMullen, David Hietapelto. 30.05.2006.
10. Moiseev V. A. et. al. Production technology of liquid-fueled rocket engines: tutorial. Edited by Moiseev V. A., Tarasov V. А. Moscow: MGTU im. N. E. Baumana, 2008. 381 p.
11. Tselikov А. I., Barbarich М. V., Vasilchikov М. V. et. al. Special rolling mills. Moscow: Metallurgiya, 1971. 336 p.
12. Kodron К. Hot forming method. Production processes of hot metal processing. Vol. 3. Moscow: Moskovskoe nauchnoe izdatelstvo «MAKIZ», 1929. 383 p.
13. Agasyants G. A., Zuber D. L., Kulikov A. M. Method for making variable-profile parts, mainly leaf springs with small number of leaves and rolling process for performing the method. Patent RF No. 2212972. Claimer and patent owner: AO «Nauchnoproizvodstvennaya firma po vnedreniyu nauchnyck i inzhenernotekhnicheskikh innovatsy». Applied: 08.01.2002. Published: 27.09.2003, Bulletin No. 27.
14. Galkin S. P., Romantsev B. A., Kharitonov Е. А. Realization of innovation potential of the universal method of radial-shift rolling. Chernye Metally. 2015. No. 1. pp. 23–28.
15. Romantsev B. A., Gamin Y. V., Goncharuk A. V., Aleshchenko A. S. Innovative Equipment for Producing Cost-Effective Hollow Billets for Mechanical-Engineering Parts of Small Diameter. Metallurgist. 2017. Vol. 61, Iss. 3-4. P. 217–222.
16. Galkin S. P., Romantsev B. A., Dinh Xuan Та, Gamin Yu. V. Resourcesaving technology for production of round bars from used shaft of rolling railroad stock. Chernye Metally. 2018. No. 4. pp. 20–27.
17. Romantsev B. A. et al. Hex Tube Rolling. Proizvodstvo prokata. 2015. No. 6. pp. 20–22.
18. Kadach M. V., Gamin Y. V., Solonin A. N., Pozdnyakov A. V. Converting high-boron steel pipe from round to hexagonal cross section. Steel in translation. 2014. Vol. 44, Iss. 11. pp. 783–786.
19. Suvorov I. К. Metal forming. Tutorial for special metallurgical institutions for higher education. 3rd edition, revised and enlarged. Moscow: Vyshaya shkola, 1980. 364 p.

Language of full-text russian
Full content Buy
Back