Journals →  Горный журнал →  2018 →  #6 →  Back

ЭКОНОМИКА, ОРГАНИЗАЦИЯ И УПРАВЛЕНИЕ
ArticleName Экономическое обоснование инновационных решений по снижению потерь сырья в алюминиевой отрасли России
DOI 10.17580/gzh.2018.06.14
ArticleAuthor Сидоров Д. В., Пономаренко Т. В., Ларичкин Ф. Д., Воробьёв А. Г.
ArticleAuthorData

Санкт-Петербургский горный университет, Санкт-Петербург, Россия:

Сидоров Д. В., проф., д-р техн. наук, sidorov-post@yandex.ru
Пономаренко Т. В., проф., доцент, д-р экон. наук

 

Институт экономических проблем им. Г. П. Лузина КНЦ РАН, Апатиты, Россия:
Ларичкин Ф. Д., главный научный сотрудник, проф., д-р экон. наук

 

АО «Издательский дом «Руда и Металлы», Москва, Россия:
Воробьёв А. Г., шеф-редактор, проф., д-р экон. наук

Abstract

Установлены закономерности изменения технико-экономических показателей вариантов отработки запасов бокситовых руд в удароопасных условиях на больших глубинах.

keywords Рудные месторождения, удароопасность, разгрузочные скважины, барьерные целики, потери, промышленная безопасность, технологические решения, экономическая эффективность
References

1. Condition and Use of Mineral Resources in the Russian Federation in 2015: Governmental Report. Moscow : Mineral-Info. 2016. 341 p.
2. Sizyakov V. M. Current state, problems and development prospects of the integrated nepheline processing method. Zapiski Gornogo instituta. 2006. Vol. 169. pp. 16–22.
3. Alekseev A. I. Integrated processing of apatite–nepheline ore based on closed process flow charts. Zapiski Gornogo instituta. 2015. Vol. 215. pp. 75–82.
4. Voitekhovsky Yu. L. Keivy kyanite schist—strategic reserve of Russia. Problems of Kyanite Schist Development on the Kola Peninsula, in Karelia and the Urals : All-Russian Conference Proceedings. Apatity : K&M Publisher. 2010.
5. Ogorodnikov V. N., Koroteev V. A., Voitekhovsky Yu. L., Shchiptsov V. V., Polenov Yu. A., et al. Kyanite Ore of Russia. Series: Development of Mineral and Raw Materials Base of Russia. Yekaterinburg : UrO RAN. 2012. 334 p.
6. Ogorodnikov V. N., Koroteev V. A., Voitekhovsky Yu. L., Shchiptsov V. V., Polenov Yu. A., et al. Kyanite Ore: Morphogenetical Types and Processing Technologies. Series: Development of Mineral and Raw Materials Base of Russia. Yekaterinburg : RIO UrO RAN. 2013. 310 p.
7. Sidorov D. V., Shonin O. B. Prediction of geodynamic processes in mining at the rockburst-hazardous North Ural bauxite deposit. Zapiski Gornogo instituta. 2010. Vol. 188. pp. 117–120.
8. Louchnikov V. N., Eremenko V. A., Sandy M. P. Ground support liners for underground mines: energy absorption capacities and costs. Eurasian Mining. 2014. No. 1. pp. 54–62.
9. Eremenko V. A., Neguritsa D. L. Efficient and active monitoring of stresses and strains in rock masses. Eurasian Mining. 2016. No. 1. pp. 21–24. DOI: 10.17580/em.2016.01.02
10. Protosenya A. G., Karasev M. A., Petrov D. N. Investigating mechanical properties of argillaceous grounds in order to improve safety of development of megalopolis underground space. International Journal of Applied Engineering Research. 2016. Vol. 11, No. 16. pp. 8949–8956.
11. Protosenya A. G., Karasev M. A., Belyakov N. A. Elastoplastic problem for noncircular openings under Coulomb’s criterion. Journal of Mining Science. 2016. Vol. 52, No. 1. pp. 53–61.
12. Trushko V. L., Protosenya A. G., Trushko O. V. Stress–Strain behavior of the workings during the rich iron ores development under the confined aquifers. International Journal of Applied Engineering Research. 2016. Vol. 11, No. 23. pp. 11153–11164.
13. Selivonik V. G., Voinov K. A. Experience of mining under rockburst hazard. Gornyi Zhurnal. 2004. No. 3. pp. 18–24.
14. Sidorov D. V. Geomechanical justification of room-and-pillar method for deep-level mining at rockburst-hazardous deposits. Zapiski Gornogo instituta. 2013. Vol. 204. pp. 276–283.
15. Sidorov D. V. Press 3D Ural application software for prediction of rockburst-hazardous zones as well as parameters of borehole stress-relief method for ore bodies and pillars under difficult geomechanical conditions. Zapiski Gornogo instituta. 2013. Vol. 204. pp. 284–293.
16. Xing Z., Wang J., Zhang J. Expansion of environmental impact assessment for eco-efficiency evaluation of China's economic sectors: An economic input-output based frontier approach. Science of the Total Environment. 2018. Vol. 635. pp. 284–293.
17. Bredimas A. Pre-economic analysis of HTR in preparation for a comprehensive economic assessment of HTRs in the world. Nuclear Engineering and Design. 2014. Vol. 271. pp. 55–59.
18. Degel R., Fröhling Ch., Hansmann T., Kappes H., Barozzi S. The concept of waste-free fabrication of metallurgical products. Chernye Metally. 2016. No. 4. pp. 40–49.
19. Sulimova M. A., Sizyakov V. M., Litvinova T. E., Vasilyev V. V. Chernye Metally. 2016. No. 8. pp. 43– 49.
20. Leushin I. O., Subbotin A. Yu., Geyko M. A. Recycling of galvanized steel scrap for use in cast iron melting in induction melting facilities. CIS Iron and Steel Review. 2015. No. 1. pp. 19–22. DOI: 10.17580/cisisr.2015.01.04

Language of full-text russian
Full content Buy
Back