Journals →  Tsvetnye Metally →  2018 →  #4 →  Back

NOBLE METALS AND ALLOYS
ArticleName Ways of reducing the loss of adsorbent and gold while processing cyanide pulpes by using activated carbons
DOI 10.17580/tsm.2018.04.05
ArticleAuthor Ibragimova R. I., Grigorev K. A., Vorobev-Desyatovskiy N. V.
ArticleAuthorData

JSC “Polymetal Engineering”, Saint Petersburg, Russia:

R. I. Ibragimova, Leading Engineer
K. A. Grigorev, Engineer
N. V. Vorobev-Desyatovskiy, Head of Hydrometallurgical Department, e-mail: vdesjatovsky@polymetal.spb.ru

Abstract

Our paper considers the problems of losses of activated carbons and gold, adsorbed on them during the gold mining. Together with foreign Standard ASTM D3892–16, the Russian State Standard GOST 16188–70 is not suitable for the choice of carbonaceous sorbents, working in abrasive pulp environments. We offered a method, which may be considered as a basis for creation of Russian regulations for selection of mechanically-strong coals in the processes of sorption cyanidation. In detail, we described a strength detection method during the abrasion of granules of activated carbon in pulp. This method allows us to single out the strongest sorbent for the CIP and CIL processes. We present the results of the tests for detection of mechanical strength of activated carbons in comparison with the data, given in the accompanying forms of companies – producers of coal adsorbents. We considered the possibilities of decreasing the losses of granulated carbonaceous adsorbents and gold (I), adsorbed on them in the process of sorption cyanidation of gold-bearing ores. This process is the most expensive as far as coal consumption is concerned.

keywords Activated carbon, abrasion strength, CIL and CIP processes, reduction of gold losses, method for determining the quality of the adsorbent
References

1. Davidson R. J., Schoeman N. The management of carbon in a high-tonnage CIP operation. Journal of the Southern African Institute of Mining and Metallurgy. 1991.Vol. 91, No. 6. pp. 195–208.
2. Staunton W. P., Barbetti K. Optimizing the management of CIP/CIL circuits. Proceedings of “COM2017 — The Conference of Metallurgist”. Vancouver, August 27–30, 2017. pp. 84, 85.
3. Mikhaylov B. K., Karpuzov A. F., Ivanov A. I., Vartanyan S. V., Benevolskiy B. I. Raw material base of Russian gold and its prospects up to 2035. Gornyy vestnik Kamchatki. 2015. Iss. 3/4 (33/34). pp. 63–65.
4. Pleysier R., Dai X., Wingate C. J., Jeffrey M. I. Microtomography based identification of gold adsorption mechanisms, the measurement of activated carbon activity, and the effect of frothers on gold adsorption. Minerals Engineering. 2008. Vol. 21, No. 6. pp. 453–462.
5. Ibragimova R. I., Milchenko A. I., Vorobev-Desyatovskiy N. V. Criteria of the choice of activated carbon grade for hydrometallurgical extraction of gold from ore pulps in the processes “coal in leaching” and “coal in pulp”. Zhurnal prikladnoy khimii. 2007. Vol. 80, Iss. 6. pp. 915–927.
6. Staunton W. P. Carbon-in-Pulp. In: Gold Ore Processing. Project Development and Operations. Amsterdam : Elsevier, 2016. pp. 535–552.
7. GOST 16188–70. Method of abrasion resistance determination. Introduced: 01–07–1971.
8. ASTM D3802–16. Standard Test Method for Ball-Pan Hardness of Activated Carbon. West Conshohocken : ASTM International, 2016.
9. Zaychik B. Ts., Ruzhitskiy A. O., Khotchenkov V. P. Specifics of the quality control of activated carbons for gold mining industry. Zolotodobyvayushchaya promyshlennost. 2013. No. 3 (57). pp. 14.
10. Zaychik B. Ts., Ruzhitskiy A. O., Khotchenkov V. P., Stolyarova E. A., Strikhar Yu. V. Comparing the terminology and methods of activated carbon analyses according to the standards – GOST (State Standard) and ASTM, TM, AWWA. Vodosnabzhenie i sanitarnaya tekhnika. 2013. No. 7. pp. 44–52.
11. Van Dam H. E. Wet attrition tests for CIP/CIL carbons. Engineering and Mining Journal. 1993. Vol. 194. pp. 44, 45.
12. Barchenkov V. V. Technology of hydrometallurgical processing of gold-bearing flotation concentrates using active carbons. Chita : Poisk, 2004. 242 p.

Language of full-text russian
Full content Buy
Back