Journals →  Tsvetnye Metally →  2018 →  #3 →  Back

HEAVY NON-FERROUS METALS
ArticleName In-situ leaching of copper ores. Part 1
DOI 10.17580/tsm.2018.03.03
ArticleAuthor Meretukov M. A.
ArticleAuthorData

Meretukov M. A., Research Adviser, e-mail: mamer@inbox.ru

Abstract

The recovery of copper by leaching techniques has been practiced for centuries. In-situ leaching offers a potentially attractive way to extract copper from the subsurface without costly fragmentation and processing. Applicability of in-situ leaching is limited to deposits where sufficient permeability exists and where the copper and gangue mineralogy is amenable to leaching. This part involves a review of physical and chemical processes that are expected to affect the leaching rate of copper. A fracture network in porphyry rocks can occur naturally or can be induced by fracture stimulation by hydraulic or blasting stress. A key challenge from past projects is establishing uniform contact between the fluid and the formation in fractured environments, particularly if fractures become blocked by gases, gypsum, jarosite and mechanical precipitation during leaching. Hydraulic fracturing can be used for deposits below the water table, whilst blasting or caving can be used for deposits above the water table. The leaching of a copper oxide deposit depends on the strength and volume of sulfuric acid that reaches the ore. The leaching of a copper sulfide deposit depends on an oxidant as well as sulfuric acid reaching the ore.

keywords Copper ores, porphyry, in-sity leaching, development, efficiency, minerals, permeability, processes
References

1. Turaev N. S., Zherin I. I. Chemistry and technology of uranium : tutorial for universities. Moscow : TsNIIatominform, 2005. 407 p.
2. Yazikov V. G., Zabaznov V. L., Petrov N. N., Rogov A. E. Uranium geotechnology at Kazakhstan deposits. Almaty : Everon, 2001. 442 p.
3. Laverov N. P., Abdulmanov I. G., Brovin K. G. et al. In-situ leaching of polyelement ores. Moscow: Izdatelstvo Akademii gornykh nauk, 1998. 446 p.
4. Noskov M. D. Uranium mining by well in-situ leaching. Seversk : Izdatelstvo STI NIYaU MIFI, 2010. 83 p.
5. Seredkin M., Zabolotsky A., Jeffress G. In situ recovery, an alternative to conventional methods of mining: Exploration, resource estimation, environmental issues, project evaluation and economics. Ore Geology Reviews. 2016. Vol. 79. pp. 500–514.
6. Sinclair L., Thompson J. In situ leaching of copper: Challenges and future prospects. Hydrometallurgy. 2015. Vol. 157. pp. 306–324.
7. Montgomery A. Adapting uranium in-situ mining technology for new commercial operations. In-situ leaching of uranium — Technical, environmental and economic aspects : Proceedings of Technical Committee Meeting IAEA TECDOC-492. Vienna, 03–06 November 1987.
8. Drever J. The geochemistry of natural waters — surface and groundwater environments. 3rd ed. New Jersey, USA : Prentice Hall, 1998. 436 p.
9. Manual of acid in-situ leach uranium mining technology. Vienna : IAEA, 2001. 294 p.
10. Pykhachev G. V., Isaev R. G. Underground hydraulics. Moscow : Nedra, 1973. 360 p.
11. Davis J., Curtis G. Consideration of geochemical issues in groundwater restoration at uranium in-situ leach mining facilities. Washington : U.S. Geological Survey, 2007. 86 p.
12. Golik V. I., Zaalishvili V. B., Razorenov Yu. I. Experience of uranium mining by leaching. Gornyy informatsionno-analiticheskiy byulleten. 2014. No. 7. pp. 97–103.

Language of full-text russian
Full content Buy
Back