Journals →  CIS Iron and Steel Review →  2017 →  #2 →  Back

Raw Materials for Metallurgical Production
ArticleName Technological parameters determining physical-chemical properties and required quality of green pellets at the roasting machine No. 3 of PJSC “Mikhailovsky GOK”
DOI 10.17580/cisisr.2017.02.01
ArticleAuthor P. V. Puzakov, A. V. Kozub, A. A. Ugarov, N. T. Efendiev, A. A. Lavrinenko, A. L. Kuznetsov, A. A. Solodukhin, R. A. Poluyachtov
ArticleAuthorData

PJSC “Mikhailovsky GOK” (Zheleznogorsk, Russia):

Puzakov P. V., Director of Pelletizing Plant, postfax@mgok.ru
Kozub A. V., Cand. Eng., Chief Engineer

 

LLC “Metalloinvest” Managing Company (Moscow, Russia):
Ugarov A. A., First Deputy CEO — Production Director, a.ugarov@metalloinvest.com
Efendiev N. T., First Deputy CEO — Sales Director, n.efendiev@metalloinvest.com

 

RAN Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov — IPKON RAN (Moscow, Russia):
Lavrinenko A. A., Dr. Eng., Head of Laboratory of Comprehensive Processing of Unconventional Minerals, lavrin_a@mail.ru

 

PJSC «Uralmashzavod» (Ekaterinburg, Russia):
Kuznetsov A. L., General Director, mail@uralmash.ru

 

LLC «NPVP TOREX» (Ekaterinburg, Russia):
Solodukhin A. A., Cand. Eng., General Director, A.soloduhin@torex-npvp.ru
Poluyakhtov R. A., Team Manager, r.poluyahtov@torex-npvp.ru

Abstract

Physical and chemical properties of green (fresh) pellets, as a measure of the pellet quality, is one of the key factors determining the technical and economic performance values of the state-of-art roasting machines. The experience of modernization projects at practically all pelletizing plants in Russia and other CIS countries, proves conclusively that the operational effect of modernization of thermal routes depends on the quality of green pellets. Moreover, the latter determines the service properties of the fired pellets to a great extent. Solving of the above-mentioned problems allows to improve substantially the technical and economic operating parameters of roasting machines, as well as the quality of the finished product. The latter is especially critical in the production of direct reduced (DR) pellets, since the requirements to fired pellets are generally more strict than that to those for blast furnace practice. To improve the technical and economic parameters of a pellet plants, one should identify the bottleneck areas/stages in the pellet production process and develop the technical solutions to improve the efficiency of the mentioned areas. One of such areas is a green pelletizing shop and its line for handling and feeding of green pellets to a roasting machine. This article describes the major innovative process solutions implemented at the roasting machine No 3 at PJSC “Mikhailovsky GOK” and its ancillary facilities, which enabled to maximize the quality of green and, respectively, commercial fired pellets. Technological parameters of the process influencing the physical and chemical properties of green iron ore pellets are presented. The achievements of the implemented technological scheme and the ACS system of the roasting machine allowed to meet the conditions required for the production of high-grade green pellets of consistent quality in order to achieve the efficient technical and economic performance parameters for a new-generation roasting machine.

keywords Roasting machine, iron ore, iron ore pellets, green pelletizing, vacuum filter, charge material, bentonite, grain size measurement system
References

1. Evstyugin S. N., Gorbachev V. A., Dadyka V. V., Khlopotunov Yu. B., Ageev S. S. Machine building corporation “Uralmash” — NPVP TOREX: Comprehensive approach to the creation of pellet production lines. Stal. 2008. No. 12. pp. 3–5.
2. Korotich V. I. The basics on the theory and the technology of blast furnace feed preparation. Moscow : Metallurgiya. 1978. 206 p.
3. Gorbachev V. A., Bruev V. P., Vakhrushev L. P et al. Optimization of the pellet composition and structure — the margin for the improvement of their metallurgical properties. Stal. 2003. No. 9. pp. 5–7.
4. Evstyugin S. N., Leonov A. I., Usoltsev D. Yu., Rogov S. N. Prospects for development of the technology and equipment for filtration of iron ore concentrates’ pulp. Stal. 2010. No. 9. pp. 40–44.
5. Beloglazov I. N., Golubev V. O., Tikhonov O. N., Kuukka Yu., Yaskelyainen Ed. Filtration of process pulp. Moscow : Ruda i metally. 2003. 320 p.
6. Evstyugin S. N., Usol’tsev D. Yu., Mineev V. I., Bormotova I. G., Shavrin S. V. Comparative analysis of various types of binders in pellet production at Mikhailovsky GOK. Stal. 2005. No. 2. pp. 12–15.

7. Maltseva V. E. The study of bentonite influence on the formation of structural elements and properties of green and fired pellets. Dissertation … of Candidate of Engineering Sciences. Ekaterinburg. 2002. 181 p.
8. Starodumov A. V., Evstyugin S. N., Kruglov V. N., Lisienko V. G. Automated process control system “Grain size indicator” for fabrication of green pellets. Stal. 2008. No. 12. pp. 37–40.
9. Poluyakhtov R. A., Solodukhin A. A., Starodumov A. V., Bormotova I. G., Putalov N. N., Shevchenko A. A. Comparative analysis of green pellet handling conditions at various pellet plants. Stal. 2005. No. 2. pp. 11–12.
10. Korovin G. B., Romanova O. A., Selivanov E. N. Formation of a new identity of regional metallurgy. Ekaterinburg : Institut ekonomiki UrO RAN Publ. 2014. 234 p.
11. Gerdes M., Kurunov I., Lingardi O., Rikkets D., Chen’o R. State-of-art blast furnace process. Moscow : Metallurgizdat. 2016. 280 p.
12. Gordon Ya. M., Khodorovskaya I. Yu., Yaroshenko Yu. G. Energy-efficient and resource-saving technologies in ferrous metallurgy. Ekaterinburg : UIPTs Publ. 2012. 670 p.
13. Adamchuk A. N. The experience of implementation of largescale projects in metallurgy. Cast iron metallurgy — challenges of the XXI century. Moscow : Kodeks Publ. 2017. pp. 38–41.
14. Tretyak A. A. Blast furnace production in Russia in 2011–2016. Cast iron metallurgy — challenges of the XXI century. Moscow : Kodeks Publ. 2017. pp. 21–34.
15. Guo Y., Duan T., Travyanov A., Jiang T., Wang S., Zheng F. Study on the Improvement of Preheating and Roasting Characteristics of Pellet Made by Organic-Bentonite Compound Binder. The Minerals, Metals & Materials Society. 2015. pp. 217–224.
16. Gould L., Widter T., Woss M., Panagl A. Circular Pelletizing Technology. Metals Magazine. 2016. No. 2. pp. 71–75.
17. Gao Q., Shen Y., Wei G., Jiang X., Shen F. Diffusion beha vior and distribution regulation of MgO in MgO-bearing pellets. International Journal of Minerals, Metallurgy, and Materials. 2016. Vol. 23. No. 9. pp. 1011–1018.
18. Gao Q., Jiang X., Wei G., Shen F. Effects of MgO on densification and consolidation of oxidized pellets. Journal of Central South University. 2014. Vol. 21. no. 3. pp. 877–883.

Full content Technological parameters determining physical-chemical properties and required quality of green pellets at the roasting machine No. 3 of PJSC “Mikhailovsky GOK”
Back