Journals →  CIS Iron and Steel Review →  2017 →  #2 →  Back

Engineering Technologies
ArticleName Physical modeling of cast iron radiator nipple oppositely directed thread turn milling
DOI 10.17580/cisisr.2017.02.08
ArticleAuthor A. S. Yamnikov, O. A. Yamnikova, O. I. Boriskin, D. I. Troitsky
ArticleAuthorData

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Chair of Manufacturing Technology, yamnikovas@mail.ru
O. A. Yamnikova, Dr. Eng., Prof., Chair of Manufacturing Technology,
O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Tools and Metrology,

 

TTS Translation and Software Agency (Tula, Russia):
D. I. Troitsky, Cand. Eng., Associate Prof., Director

Abstract

The paper covers a single cutter lathe thread turn milling simulation that significantly reduces physical testing costs. The turn milling process involves a synchronized tool (helical mill), and workpiece rotation with a radial oncoming feed through a mill and workpiece relative movement. The cutting rate occurs by the mill teeth movement over the workpiece. The machining depth in each pass varies from zero to the max value, a common milling process feature. The proposed approach simulates the process parameters through thread turning or incomplete circular groove turning of workpieces attached offcenter to a lathe tooling. The proposed turn milling simulation method has reduced the number of machined referenced parts by 710 times. Accordingly, the experimental research period and cost have also been reduced. The research has revealed that the VK6M hard alloy tool life in turn milling with coolant is 50 times longer than the R6M5 HSS tool life while the useful tool life (measured as the number of parts machined within the tool life) for VK6M tools in turn milling with coolant is 50 times higher than that of R6M5 HSS tools.

The results of the research project are published with the financial support uf Tula State University within the framework of the scientific project No. 2017-42ПУБЛ.

keywords Thread turn milling, simulation, lathe, single cutter, thread, eccentric workpiece fixing
References

1. Skukhturov S. I., Khlunov V. N. Thread Milling Generating Process. Mashinostroitel. 1941. No. 2. pp. 6–9.
2. USSR Patent No. 380409. A Thread Cutting Process. Nauchno-informatsionnyi byulleten. 1973. No. 15.
3. Voronov V. N. Threading with Helical Tools. Stanki i instrument. 1991, No. 10. pp. 14–16.
4. Voronov V. N., Serova E. V. Thread Geometry Generation with Radial Feed Helical Tool. Manufacturing and Assembly Technology. Tula State University. 1993. pp. 87–95.
5. Lashnev S. I., Serova E. V. Mill Broach Generatrix Parameters Evaluation for Round Thread Machining. Automated Manufacturing Systems and Robotics. Collection Volume. Tula State University. 1993. pp. 87–92.
6. D. Yu. Solyankin, A. S. Yamnikov. Relative Thread Turn Milling Productivity. Orel State University Proceedings. “Basic and Applied Technology” Series. 2010. Vol. 6 (284). pp. 109–114.
7. Solyankin D. Yu., Yamnikov A. S., Yamnikova O. A. Thread Turn Milling. Process and Tool Design Feasibility Study (a Monograph). Lambert Press. Germany. 2012. 176 p.
8. Yamnikova O. A., Yamnikov A. S.. Manufacturing System Components Simulation (a Tutorial). Tula. Izdatelstvo Tulskogo gosugarstvennogo universiteta. 2013. 191 pp.
9. COMPASS 3D V15 CAD. Serial number: ASCON_ОО-0014661. OS: Windows XP/Vista/7/8.
10. A. A. Gukhman. Introduction to Similarity Law. LKI Publishers. 2010. 296 p.
11. Silin S. S. Similarity Law Applied to Cutting. M., Mashinostroenie. 1979. 152 p.
12. Zamyatina O. M. System Modeling (a Tutorial). Tomsk. Izdatelstvo Tomskogo Politekhnicheskogo universiteta. 2009. 204 p.
13. Finayev V. I. System Modeling (a Tutorial). Taganrog. Izdatelstvo Yuzhnogo Federalnogo universiteta. 2013. 181 p.
14. Malkov O. V., Stepanova M. Yu. The Analysis of Design Parameters of Thread Milling Cutters. Nauka i obrazovanie (Internet edition of the Moscow State Technical University named after N. E. Bayman). 2015. No. 07. pp. 76–95.
15. Jun M. B. G., Araujo A. C. Modeling and Analysis of the Thread Milling Operation in the Combined Drilling/Thread Milling Process. Proceedings of the 2008 ASME International Manufacturing Science (MSEC’2008), October 7-10, 2008, Evanston, Illinois, USA. Vol. 1. Paper No. MSEC_ICM&P2008-72209. pp. 377–386.
16. Jun M. B. G., Araujo A. C. Modeling of the thread milling operation in a combined thread/drilling operation: Thrilling. Journal of Manufacturing Science and Engineering, Transactions of the ASME. 2010. Vol. 132, No. 1. Art. No. 014505.
17. Araujo A. C., Jun M. B. G., Kapoor S. G., DeVor R. E. Experimental Investigation of a Combined Drilling and Thread Milling Process: Thrilling. Transactions of NAMRI/SME. 2007. Vol. XXXV. pp. 518–527.
18. Araujo A. C., Fromentin G., Poulachon G. Analytical and Experimental Investigations on Thread Milling Forces in Titanium Alloy. International Journal of Machine Tools & Manufacture. 2013. Vol. 67. pp. 28–34. DOI: 10.1016/j.ijmachtools. 2012.12.005.

Full content Physical modeling of cast iron radiator nipple oppositely directed thread turn milling
Back