Journals →  CIS Iron and Steel Review →  2016 →  #2 →  Back

ArticleName The mathematical model of the thick steel sheet flattening on the twelve-roller sheet-straightening machine. Message 2. Forces and moments
DOI 10.17580/cisisr.2016.02.09
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISIS”, Moscow, Russia:

V. N. Shinkin, DSc. Phys.-Math., Prof., shinkin-korolev@yandex.ru

Abstract

The mathematical method for the determining of the technological parameters of the cold straightening of the thick steel sheet on the twelve-rolled sheet-straightening machine is proposed. The calculations allow us to determine the support reaction of working rollers, the residual stresses in the wall of the steel sheet, the proportion of plastic deformation on the sheet thickness and the relative deformation of the longitudinal surface fibers of the sheet under the straightening depending on the rollers’ radius, the pitch between the straightening machines’ working rollers, the magnitude of the sheet reduction by the upper rollers, the sheet thickness, as well as the elastic modulus, the yield stress and the hardening modulus of the sheet metal. The results of the research can be used at the metallurgical plants.

keywords Steel sheet, sheet-straightening machines, curvature of sheet, springback coefficient, elastoplastic continuous medium
References

1. Mazur I. P., Dolmatov A. P., Borisov S. S. Investigation and numerical modeling of the process of cold rolling HSLA steels. Materials Science Forum. 2012. Vol. 704-705. pp. 832–841.
2. Astakhov A. A., Dunaev D. N., Mazur I. P. Machining profiling of the working rolls as a way to control cross-section of the rolled steel. Materials Science Forum. 2013. Vol. 762. pp. 337–342.
3. Mazur I. P. Monitoring the surface quality in sheet rolling. Steel in Translation. 2011. Vol. 41. No. 4. pp. 326–331.
4. Mazur I., Koinov T. Quality control system for a hot-rolled metal surface. Journal of Chemical Technology and Metallurgy. 2014. Vol. 49. No. 1. pp. 71–76.
5. Belskiy S. M., Yankova S., Chuprov V. B., Bakhaev K.V., Stoyakin A. O. Temperature field of stripes under hot rolling. Journal of Chemical Technology and Metallurgy. 2015. Vol. 50. No. 6. pp. 613–616.
6. Belskiy S., Mazur I., Lezhnev S., Panin E. Distribution of linear pressure of thin-sheet rolling across strip width. Journal of Chemical Technology and Metallurgy. 2016. Vol. 51. No. 4. pp. 371–378.
7. Mukhin Yu. A., Solovyev V. N., Bobkov E. B. Formation of the structure of metal in the finishing group of stands of the hot-rolling mill. Steel in Translation. 2001. Vol. 31. No. 3. pp. 77–80.
8. Mukhin Yu. A., Belyanskiy A. D., Zajtsev V. S., Tretyakov A. I., Baryshev V. G. Production of hot rolled strip with guaranteed mechanical properties. Steel in Translation. 1992. No. 12. pp. 61–63.
9. Mukhin Yu. A., Belyanskiy A. D., Kolpakov S. S., Nikitin V. E., Melnikov A. V. Improvement of hot strip rolling conditions to reduce rolled-in scale. Steel in Translation. 1993. No. 7. pp. 41–43.
10. Shinkin V. N., Kolikov A. P. Simulation of the shaping of blanks for large-diameter pipe. Steel in Translation. 2011. Vol. 41. No. 1. pp. 61–66.
11. Shinkin V. N., Kolikov A. P. Elastoplastic shaping of metal in an edge-bending press in the manufacture of large-diameter pipe. Steel in Translation. 2011. Vol. 41. No. 6. pp. 528–531.
12. Shinkin V. N., Kolikov A. P. Engineering calculations for processes involved in the production of large-diameter pipes by the SMS Meer technology. Metallurgist. 2012. Vol. 55. Nos. 11–12. pp. 833–840.
13. Zdor V. A., Brovman M. Ya. Casting-rolling unit with cambered rolls. Russian metallurgy (Metally). 2012. Vol. 2012. No. 9. pp. 757–762.
14. Brovman M. Ya. Stress state of cylindrical pipe with variable mechanical properties. Russian engineering research. 2011. Vol. 31. No. 8. pp. 737–741.
15. Brovman M. Ya. Bending deformation of rotating metallic tubes. Russian metallurgy (Metally). 2010. Vol. 2010. No. 9. pp. 779–789.
16. Brovman M. Ya. On the resistance to plastic deformation upon rolling and continuous casting of metals. Russian metallurgy (Metally). 2004. Vol. 2004. No. 3. pp. 225–232.
17. Brovman M. Ya., Nikolaev V. A., Polukhin V. P. Strain resistance of steel during roll ingotless rolling. Russian metallurgy (Metally). 2007. Vol. 2007. No. 4. pp. 287–292.
18. Brovman M. Ya., Nikolaev V. A., Polukhin V. P. Plasticdeformation zone length and the allowable speed for ingotless rolling. Russian metallurgy (Metally). 2007. Vol. 2007. No. 1. pp. 36–40.
19. Brovman M. Ya. On plastic deformation during soft-reduction rolling. Russian metallurgy (Metally). 2006. Vol. 2006. No. 1. pp. 13–19.
20. Brovman M. Ya. Pressure treatment of metals: asymmetrical rolling in curvilinear-billet production. Steel in Translation. 2006. Vol. 36. No. 4. pp. 48–50.
21. Brovman T. V. Design of welded double layer pipelines. Welding international. 2012. Vol. 26. No. 7. pp. 553–554.
22. Kobelev O. A., Zinovyev A. V., Tsering M. A. Effective production of large pipe blanks. Steel in Translation. 2009. Vol. 39. No. 6. pp. 501–505.
23. Romantsev B. A., Goncharuk A. V., Mikhailov V. K., Babina E. S. Improving the hot rolling of tubes. Steel in Translation. 2002. Vol. 32. No. 12. pp. 47–51.
24. Romantsev B. A., Goncharuk A. V., Zimin V. Y., Pakhomov V. P. et al. Introducing seamless-pipe production OAO Vyksunskii metallurgicheskii zavod. Steel in Translation. 2009. Vol. 39. No. 9. pp. 803–805.

Full content The mathematical model of the thick steel sheet flattening on the twelve-roller sheet-straightening machine. Message 2. Forces and moments
Back