Журналы →  Eurasian mining →  2016 →  №1 →  Назад

POWER ENGINEERING, AUTOMATION
Название Energy-saving modular units for selective coal cutting
DOI 10.17580/em.2016.01.06
Автор Gabov V. V., Zadkov D. A.
Информация об авторе

Saint-Petersburg Mining University, Saint Petersburg, Russian Federation:

Gabov V. V., Doctor of Technical Sciences, Professor, gvv40@mail.ru
Zadkov D. A., Candidate of Technical Sciences, Assistant Professor, dzadkov@yandex.ru

Реферат

The authors analyze coal cutting from the viewpoint of the least energy input of the process. A coal seam is assumed the medium with essential anisotropy of strength due to lamination, banding, jointing with sliding surfaces, normal jointing and weakening due to overburden pressure. It is shown that under such conditions, the lowest energy input of mineral mining is achievable through selectivity of the process. The scope of the discussion embraces feasibility and prospects of selective coal cutting and extraction in complicated ground conditions, both in longwalling and in narrow faces. The method of face operation, the cutting module and the frontend modular units have been proposed in the article. The unitized cutting modules are designed for energy-saving cutting of coal in a local face with the feasible selectivity of the process. The front-end modular unit is composed of the unitized cutting modules equipped with static, dynamic or hybrid action cutting heads. In terms of the front-end modular unit, the authors consider the method of longwalling, with local faces and parallel cuts, when coal is cut by sequential shears along the bedding. The front-end modular units are recommended for mining bedded deposits, e.g., coal, potash. As opposed to end-on cutting-loading units, the front-end modular units are efficient in long and short walls, in cutting either high-grade coal or in recovery of pillars and noncommercial reserves.

Ключевые слова Coal, seam, face, cutting module, cutting, frontend unit, selectivity
Библиографический список

1. S. S. Peng. Longwall Mining. 2nd edition. October 2006. p. 621.
2. Petr Novak, Jan Babjak. Roof support control in longwall technology. 4th Coal Operators’ Conference, University of Wollongong, The Australasian Institute of Mining and Metallurgy & Mine Managers Association of Australia. 2014. pp. 34–41.
3. Jonathon C. Ralston, David C. Reid, Mark T. Dunn, David W. Hainsworth. Longwall automation: Delivering enabling technology to achieve safer and more productive underground mining. International Journal of Mining Science and Technology. November 2015. Vol. 25, Iss. 6. pp. 865–876.
4. Klishin V. I., Royter M., Kissling U., Vessel A. O. Sistema avtomaticheskogo upravleniya krepyu (SAUK) kak sredstvo adaptatsii krepi k razlichnym gorno-geologicheskim usloviyam shakht Kuzbassa (Automatic support control system as a mean of support adaptation to various mining-geological conditions in Kuzbass mines). Vestnik Kuzbasskogo Gosudarstvennogo Tehnicheskogo Universiteta = Vestnik of Kuzbass State Technical University. 2014. Iss. 1 (101). pp. 34–39.
5. Buyalich G. D., Antonov Yu. A., Sheykin V. I. O napravlenii snizheniya napryazhenno-deformirovannogo sostoyaniya prizaboynoy zony ugolnogo plasta (About the way of decreasing of the stress-strain state of coal layer face zone). Gornyy Informatsionno-Analiticheskiy Byulleten = Mining Informational and Analytical Bulletin. 2011. Iss. 12, Vol. 2. pp. 198–202.
6. Jonathon C. Ralston, Andrew D. Strange. Developing selective mining capability for longwall shearers using thermal infraredbased seam tracking. International Journal of Mining Science and Technology. January 2013. Vol. 23, Iss. 1. pp. 47–53.
7. Jonathon C. Ralston, Andrew D. Strange. Thermal infraredbased seam tracking for intelligent longwall shearer horizon control. 12th Coal Operators’ Conference, University of Wollongong & The Australasian Institute of Mining and Metallurgy. 2012. pp. 78–85.
8. Gorodilov N. N. Osobennosti rezhimov raboty mekhanizirovannoy krepi s uchetom veroyatnostnogo kharaktera vzaimodeystviya ee s trudnoobrushayushcheysya krovley ugolnogo plasta (Peculiarities of operation modes of mechanized support taking into account the probabilistic nature of its interaction with difficultly falling roof of coal layer). Gornyy Informatsionno-Analiticheskiy Byulleten = Mining Informational and Analytical Bulletin. 2012. No. 3. pp. 234–239.
9. Buevich V. V., Gabov V. V., Zadkov D. A., Vasileva P. A. Adaptation of the mechanized roof support to changeable rock pressure. Eurasian Mining. 2015. Iss. 2. pp. 11–14. doi: 10.17580/em.2015.02.03.
10. Karlenkov A. A. Analiz sostoyaniya rabot po sozdaniyu strugovykh agregatov dlya vyemki tonkikh pologikh plastov bez postoyannogo prisutstviya lyudey v ochistnom zaboe. Nauchnye trudy (Analysis of the state of works for creation of plough units for extraction of thin flat layers without the constant human control in the working face. Proceedings). Moscow : Skochinsky Institute of Mining, 1981. Iss. 201. pp. 39–44.
11. Romanov P. D., Malyshev V. P., Kurakin A. I. Gornye mashiny i avtomatika (Mining machinery and automation). Moscow : TsNIEIugol, 1974. Iss. 8. pp. 8–12.
12. Namestnikov Yu. I., Dementev A. I. Ugol = Russian Coal. 1988. No 1. pp. 46–49.
13. Kustrikov E. V., Gabov V. V., Zadkov D. A. Osobennosti konstruktsii i tekhnologii raboty unifitsirovannogo vyemochnogo modulya dlya dobychi kaliynoy rudy (Peculiarities of design and operation technology of unified extraction module for potassium ore mining). Sovremennye problemy nauki i obrazovaniya = Modern problems of science and education. 2015. No. 1. Available at: http://www.science-education.ru/125-19961
14. Bumbers A. T., Gabov V. V., Efimov I. A. Narodnoe khozyaystvo respubliki Komi (The national economy of the republic of Komi). 1998. Vol. 7, No 1. pp. 23–25.
15. Zadkov D., Bolshakov V. Mining machinery: enhancing cutting efficiency. Russian mining. 2005. No 1. рp. 19–21.

Полный текст статьи Energy-saving modular units for selective coal cutting
Назад