Журналы →  Non-ferrous Мetals →  2015 →  №2 →  Назад

HEAVY NON-FERROUS METALS
Название Technology of separate processing copper-, plumbiferous polymetallic feedstock
DOI 10.17580/nfm.2015.02.02
Автор Dosmukhamedov N. K., Zholdasbay E. E., Fedorov A. N., Shautenov M. R.
Информация об авторе

Chair of Metallurgy of Non-ferrous Metals of Kazakh National Technical University after K. I. Satpayev, Almaty, Kazakhstan:

N. K. Dosmukhamedov, Professor, e-mail: nurdos@bk.ru

 

Chair of Non-ferrous Metals and Gold of National University of Science and Technology “MISiS”, Moscow, Russia:
E. E. Zholdasbay, Master's Student
A. N. Fedorov, Professor


Chair of Metallurgy of Noble Metals and Mineral Processing of Kazakh National Technical University after K. I. Satpayev, Almaty, Kazakhstan:
M. R. Shautenov, Assistant Professor

 

Zh. Zh. Kabylbekov, Assistant of a Chair of Non-Ferrous Metals and Gold of National University of Science and Technology “MISiS” took part in the study.

Реферат

Involvement to processing of complex mineralogical and chemical composition of polymetallic ores and concentrates dramatically increased the volume of produced sulfide middlings and oxidized recycled materials characterized by complex chemical and phase composition. High concentration of metal impurities in these products considerably complicated their processing. The search for highly effective ways of processing of sulphide middlings and oxidized materials to further extraction of precious metals is a significant reserve of improving technological and economic performance of enterprises. For lead companies in Kazakhstan the solution of this problem obtains particular importance and urgency, where there is the highest yield of intermediates and circulating oxidized materials. In this paper, on the basis of thermodynamic calculations of the Gibbs free energy reactions occurring between the components of sulphide middlings and oxidized materials under intense bubbling melt, profound possibility of separate joint recycling is justified by sequentially blowing liquid-alloy with air and natural gas. The results of the industrial balance heats fully confirmed the accuracy of thermodynamic calculations and allowed to determine the optimum process parameters technology to ensure high recovery of valuable metals in the desired products. It was specified that the best technological parameters for extraction of non-ferrous metals and related products to the target are achieved by melting a balanced blend with a ratio of oxidized sulfide materials and middlings of 0.3:1. This ensures a high selective extraction of valuable metals as lead and precious metals in bullion to 97 and 98%, proper; copper matte — 90%; zinc in slag — 90%; arsenic, antimony and rhenium dust — 97 and 98%, proper.

Ключевые слова Sulfide middling, leaded cake, dust, blowing, oxygen, natural gas, classification, recovery
Библиографический список

1. Daukeev S. Zh. Mineralno-syrevye resursy Kazakhstana — vozmozhnosti nauchno-tekhnicheskogo razvitiya. Voprosy kompleksnoy pererabotki syrya Kazakhstana: Trudy Pervoy Mezhdunarodnoy konferentsii (Mineral resources of Kazakhstan — the possibilities of science-technical development. Problems of complex processing of Kazakhstan raw materials: Proceedings of the First International conference). Astana, 2003. pp. 8–12.
2. Vaskevich A. D. Avtogennye protsessy v pirometallurgii tsvetnykh metallov (Autogenous processes in non-ferrous metals pyrometallurgy). Byulleten Vserossiyskogo Instituta Nauchnoy i Tekhnicheskoy Informatsii po metallurgii tyazhelykh tsvetnykh metallov = Bulletin of All-Russian Institute of Scientific and Technical Information about the metallurgy of heavy non-ferrous metals. 1988. Vol. 18. pp. 3–67.
3. Norgate T., Jahanshahi S. Minerals Engineering. 2010. Vol. 23. pp. 65–73.
4. Mechev V. V., Bystrov V. P., Tarasov A. V. Avtogennye protsessy v tsvetnoy metallurgii (Autogenous processes in non-ferrous metallurgy). Moskva : Metallurgiya, 1991.
5. Klimov A. V., Melamud S. G., Poluyakhtov A. V., Binder D. S. Podgotovka svintsovykh pyley i kekov k pirometallurgicheskoy pererabotke (Preparation of lead dusts and cakes to pyrometallurgical processing). Tsvetnye Metally = Non-ferrous metals. 2014. No. 10. pp. 66–70.
6. Savinova Yu. A., Portov A. B., Tsemekhman L. Sh. Vliyanie parametrov obzhiga sulfidnogo polimetallicheskogo kontsentrata na kachestvo poluchaemogo ogarka (Influence of sulfide polymetallic concentrate calcinating parameters on obtained cinder quality). Tsvetnye Metally = Non-ferrous metals. 2013. No. 7. pp. 40–45.
7. Shtoyk S. G., Tsemekhman L. Sh., Seregin P. S. et al. Termodinamicheskiy raschet raspredeleniya svintsa v produktakh pryamoy plavki svintsovogo syrya (Thermodynamic calculation of lead distribution in the products of direct melt of lead raw materials). Tsvetnaya metallurgiya = Non-ferrous metallurgy. 2011. No. 2. pp. 32–37.
8. Takezhanov S. T., Erofeev I. E. Kontseptsiya «Kompleks» tekhniko-tekhnologicheskogo razvitiya tsvetnoy metallurgii Kazakhstana (“Kompleks” concept of technical-technological development of non-ferrous metallurgy in Kazakhstan). Almaty, 2001. 136 p.
9. Seregin P. S., Popov V. A., Tsemekhman L. Sh. Novye metody pererabotki materialov, soderzhashchikh tsink, olovo i svinets (New method of processing of zinc, tin and lead containing materials). Tsvetnye Metally = Non-ferrous metals. 2010. No. 10. pp. 27–34.
10. Dosmukhamedov N. K., Komkov A. A., Bystrov V. P., Fedorov A. N. Sposob pererabotki shlakov (Slag processing method). Patent KZ, No. 20220. Published: November 15, 2010. Bulletin No. 11.
11. Kopylov N. I., Kaminskiy Yu. D. Myshyak (Arsenic). Novosibirsk : Siberian University Publishing House, 2004. 367 p.
12. Popov V. A., Tsemekhman L. Sh., Velyuzhinets G. A., Fomichev V. B. Termodinamicheskoe modelirovanie povedeniya myshyaka v pirometallurgicheskom proizvodstve medi (Thermodynamic modeling of arsenic behavior in pyrometallurgical production of copper). Tsvetnye Metally = Non-ferrous metals. 2014. No. 5. pp. 24–28.

Language of full-text английский
Полный текст статьи Получить
Назад