Journals →  Chernye Metally →  2015 →  #1 →  Back

Iron and Steelmaking
ArticleName Dephosphorization strategies and simulation in oxygen steel making
ArticleAuthor W. Urban, M. Weinberg, J. Cappel
ArticleAuthorData

Hüttenwerke Krupp Mannesmann GmbH (Duisburg, Germany):

Urban W., Mag. Eng.
Weinberg M., Dr.-Eng.

 

Cappel Stahl Consulting GmbH (Meerbusch, Germany):
Cappel J., Dr.- Eng., Head of Ironmaking Shop, e-mail: juergen.cappel@cappel-consult.de

Abstract

The removal of phosphorus from the furnace charge is a well understood process today and is described by using the phosphorus partition ratio between metal and slag LP = (% P2O5)/[% P]. The detailed analysis of the effect of corresponding chemical and thermodynamical parameters on the base of industrial tests is given. The LP depends on the melt temperature, the Fet content in the slag, slag basicity, slag vo lume, MgO content in the slag and the steel carbon content. Other para meters are the phoshorus input with the hot metal and the phosphorus content of the steel product specifi cation. Furthermore the results also vary with the individual plant equipment available and the dephosphorization strategy applied. Basic oxygen shops using combined blowing (top oxygen tuyere and bottom stirring with inert gas) have some kinetic advantages comparing with the shops supplied with only top tuyere. As soon as dephosphorization reaction is far from is thermodynamical equilibrium state due to high productivity of industrial processes with blowing, it is necessary to take into account during simulation features of the equipment of an individual basic oxygen shop. Therefore, each basic oxygen shop should have its own dephosphorization model on the base of statistical data evaluation.

keywords Basic oxygen shops, dephosphorization, thermodynamical parameters, kinetic parameters, simulation, blowing, stirring, oxygen tuyeres, inert gases
References

1. Shukla, A. K.; Deo, B.: Mathematical modeling of phosphorus prediction in BOF steelmaking, a fundamental approach to produce low Phosphorus steels and ensure direct tap practice, Dpt. of Materials and Metallurgical Engineering, Indian Institute of Technology Kanpur, India.
2. Bloom, T. A.; Fosnacht, D. R.; Haezebrouck, D. M.: Iron Steelmak. 17 (1990) Nr. 9, S. 35/41.
3. Senk, D. et al.: Material Collection Iron Metallurgy, IEHK, RWTH Aachen, Aachen, 1994/1995.
4. Falkenreck, U.; Kempgen, J.; Schlüter, J.: Strategies to achieve low Phosphorus content for customer applications, Proc. AISTech 2007, 7-10. Mai 2007, Indiapolis, USA.
5. Basu, S.: Studies on Dephosphorization during Steelmaking, School of Industrial Engineering and Management, Stockholm, Schweden, 2007 (Doctoral Thesis).
6. Deo, B.; Halder, J.; Snoeujer, B.; Overosch, A.; Boom, R.: Ironmak. Steelmak. 32 (2005) Nr. 1, S. 54/60.
7. Bannenberg, N.: stahl u. eisen 111 (1981) Nr. 6, S. 71/76.
8. Cappel, J.; Huesken, R.; Guogang, Z.: Experience with long BOF campaign life and TBM bottom stirring technology at Baosteel Meishan in China, Proc. AISTech 2012, 5.-7. Mai 2012, Atlanta, USA; stahl u. eisen 132 (2012) Nr. 11, S. 61/78.
9. Li, Y.: U.S. Steel BOP/Q-BOP Flux Control Model, Presentation, OSTC meeting, 12. Feb. 2012.
10. Basu, S.; Lahiri, A. K.; Seetharaman, S.; Halder, J.: ISIJ Intern. 47 (2007) Nr. 5, S. 766/68.

Language of full-text russian
Full content Buy
Back