Журналы →  Chernye Metally →  2015 →  №1 →  Назад

Development of metallurgy in Russia and CIS
Название Efficiency rise of steel making production via additional recovery of valuable components from utilized slags
Автор A. A. Yusupkhodzhaev, Kh. R. Valiev, S. R. Khudoyarov, S. T. Matkarimov
Информация об авторе

Tashkent State Technical University (Tashkent, Uzbekistan):

Yusupkhodzhaev A. A., Dr. Eng., Prof.,
Valiev Kh. R., Cand. Eng., Ass. Prof.,
Khudoyarov S. R., Cand. Eng., Head of the Chair «Metallurgy»,
Matkarimov S. T., Assistant, e-mail: syleyman0677@yandex.ru

Реферат

The problems of additional recovery of iron and its oxidized compounds from utilized steel-smelting slags are considered in the article. The main attention is paid to solving of social problems connected with improvement of the ecological situation around iron and steel works and to increase of its efficiency due to additional recovery of valuable components from industrial wastes. The analysis of chemical, fractional and mineralogical composition of processed steel slags is done. It is shown that there is a noticeable amount of the iron, which concentration comparably to poor iron ores of Uzbekistan, after allocation of magnetic components in dump slags. Various methods are investigated for their allocation, and gravitational enrichment on a concentration table is recognized as the most optimum technology. The obtained material can be used as import-substituting raw materials in the steel making technology at JSC “Uzmetkombinat”. Putting into practice of this technology will allow to expand raw material base of the works without additional expenses for geological and mining operations and to transfer to the waste-saving process. Slag dumps in this case can be actually eliminated, what will have positive effect on environment protection.

Ключевые слова Slags, oxidized compounds, iron extraction, environmental problems, utilized steel-smelting slags, additional recovery, magnetic components, poor iron ores, gravitational allocation, import-substituting raw materials
Библиографический список

1. Fomenko I. A. Inzhenernaya ekologiya: Ekologicheskaya bezopasnost predpriyatiy metallurgicheskogo kompleksa (Engineering ecology: Ecological safety of metallurgical complex enterprises). Inzhenernaya ekologiya = Engineering Ecology. 2001. No. 6. pp. 46–54.
2. Holger Wulfert, Michael Keyßner, Horst Michael Ludwig, Burkart Adamczyk, Andreas Schiffers. Vysokoreaktsionnosposobnye komponenty tsementa iz staleplavilnykh shlakov dlya uluchsheniya ekologii i ekonomiki (High-reaction cement components from steel-smelting slags for improvement of ecology and economy). Chernye Metally = Ferrous metals. 2014. No. 5. pp. 50–56.
3. Panfilov M. I. Metallurgicheskiy zavod bez shlakovykh otvalov (Metallurgical plant without slag dumps). Moscow : Metallurgiya, 1978. 248 p.
4. Golovin A. M. Metallurg = Metallurgist. 1974. No. 10. pp. 25–26.
5. Bauman E. W. Journal of Metals. 1966. Vol. 18, No. 1. pp. 91–96.
6. Sanakulov K. Nauchno-tekhnicheskie osnovy pererabotki otkhodov gorno-metallurgicheskogo proizvodstva (Scientifi c-technical basis of processing of mining-metallurgical production wastes). Tashkent: Publishing House “FAN” of Academy of Sciences of Republic of Uzbekistan, 2009. 404 p.
7. Smirnov V., Biletskiy V. Gravitatsionnye protsessy obogashcheniya poleznykh iskopaemykh (Gravitation processes of mineral concentration). Moscow : Nedra, 2007. 346 p.
8. Avdokhin V. M. Osnovy obogashcheniya poleznykh iskopaemykh (Basis of mineral concentration). Moscow : Nedra, 2012. 295 p.

Language of full-text русский
Полный текст статьи Получить
Назад