Журналы →  Eurasian mining →  2014 →  №1 →  Назад

ROCESSING AND COMPLEX USE OF MINERAL RAW MATERIALS
Название Hydrophobiс modification of mineral binders by additives produced from peat
Автор Misnikov O. S., Chertkova E. Yu.
Информация об авторе

Tver State Technical University:

Misnikov O. S., Dean, Doctor of Engineering Seiences, e-mail: oleg.misnikov@gmail.com

Chertkova E. Yu., Master of Engineering and Technologies, e-mail: lastochka-w@mail.ru

Реферат

The article reviews the investigation results in the area of production of organic free flowing additives for dispersed mineral materials. An industrial raw material is peat; a treatment material is Portland cement. A free flowing effect is achieved by hydrophobic modification of the material surface. A hydrophobic modification process involved extracting bitumen components from peat by means of thermochemical destruction of organic matter and applying them in the form of film coatings on the surface of cement mineral particles. The film thickness is 2 to 12 nm; it is sufficient for effective cement protection against liquid and vaporous moisture. The electron-microscope investigation of modified particles revealed a high content of carbon (carbon-bearing component) in the subsurface layer; it is a factor that provides a highly hydrophobic effect. Building materials made on the basis of hydrophobicmodified cements partially retain hydrophobic properties and keep a reduced water absorption capacity. The application of the method elaborated allows increasing cement and dry building mixtures storage life manifold without losing their physical and chemical properties, the environment of high atmospheric moisture capacity being included.

Ключевые слова Peat, cement, hydrophobic modification, bituminous film, strength, electron microscopy, infrared spectroscopy, nanoscale
Библиографический список

1. Taylor H. F. W. Cement Chemistry. Moscow, Mir, 1996, 560 p. Binding materials, concretes and goods made of them. G. I. Gorchakov, ed. Moscow, Vysshaya Shkola, 1976, 293 p.
2. Markov V. D., Olenin A. S., Ospennikova L. A. World peat deposits. Moscow, Nedra, 1988, 383 p.
3. Lishtvan I. I., Terentiev A. A., Bazin E.T., Golovach A. A., Physical and chemical theory of peat production technology. Minsk, Nauka i Tekhnika, 1983, 232 p.
4. Rakovskiy V. E. General chemical engineering of peat. М., L., 1949, 363 p.
5. Rakovskiy V. E., Filimonov F. A., Novichkova E. A. Pyrogenic process chemistry. Minsk, AN BSSR, 1959, 208 p.
6. Chukhareva N. V., Dolgikh S.M, Maslov S. G. The environment and thermal treatment influence on sedge low moor peat composition and properties. Vegetable Feed Chemistry, 2004, No. 2. pp. 61–66.
7. Belkevich P. I., Gaiduk K. A., Zuyev T. T., Ivanova L. A. Peat wax and accompaniments. Minsk, Nauka i Tekhnika, 1977, 232 p.
8. Smol’yaninov S. I., Maslov S. G., Thermal peat briquetting. Tomsk, 1975, 108 p.
9. Misnikov O. S. Physicochemical principles of hydrophobization of mineral binders by additives produced from peat raw material. Theoretical Foundations of Chemical Engineering, 2006, Vol. 40, No. 4. pp. 423–430.
10. Bazin Ye. T., Kopenkin V. D., Kosov V.I. Technical peat analysis. Moscow, Nedra, 1992, 431 p.
11. Afanasyev A. E., Gamayunov S. N., Misnikov O. S. Structurization processes during drying of sapropels with varying ash content. Colloid Journal, 1999, Vol. 61, No. 3. pp. 274–279.
12. Afanasyev A. E., Misnikov O. S. Estimation of structural characteristics during drying of molded organic and organomineral biogenic materials. Theoretical Foundations of Chemical Engineering, 2003, Vol. 37, No. 6. pp. 582–589.
13. Kruglitskiy N. N., Boiko G. P. Physical-chemical mechanics of cement-polymer compositions. Kiev, Naukova Dumka, 1981, 240 p.
14. Misnikov O. S., Pukhova O. V., Belugin D. Y., Ashcheulnikov P. F., Hydrophobization of dry building mixes with additives made of organic biogenic material. Building Materials, 2004. No 10. pp. 2–4.

Language of full-text английский
Полный текст статьи Получить
Назад