Journals →  Chernye Metally →  2014 →  #4 →  Back

115th anniversary of St. Petersburg State Polytechnic University
ArticleName The main directions of improvement of ecological parameters in iron and steel production
ArticleAuthor I. V. Butorina
ArticleAuthorData

St. Petersburg State Polytechnic University (St. Petersburg, Russia):

Butorina I. V., Dr. Eng., Prof., e-mail: butorina_irina@mail.ru

Abstract

It is shown that the environmental program of metallurgical enterprise should be based on life cycle analysis. The priority should be given to the primary activities reducing energy consumption and formation of wastes. Secondary measures aimed at neutralization and disposal of wastes should be implemented only after implementation of primary measures. Signifi cant improvement in the environmental performance of steel production enterprises with full-cycle can be achieved by increasing the proportion of recycled scrap and replacement of the agglomeration of the dispersed charge with sloshing. Selection of quality charge with optimal chemical and dispersion composition signifi cantly improves the environmental performance of the sintering and blast furnace production. Significant effect can be achieved by the coverage of sinter belt and casting yards of blast furnaces, replacing of stationary mixers with mobile mixers, as well as conducting desulphurization and desiliconization of all smelted iron. Converting furnaces have good environmental performance of steel production due to their low energy consumption and ability to collect and use converter gas as a fuel gas. Only DC electric arc furnaces can compete with them. Transition to continuous casting facilities and the use of modern methodical ovens with pull carts is the effective way of reduction of energy consumption in the rolling mill. Replacing the wet gas purification apparatus for dry purification, replacing of cooling water for evaporation and creation of water circulation systems help to reduce water consumption and the amount of generated waste. Transition to gas cleaning scheme using high head scrubber and electrical or cloth filter and recycling of metal containing waste with briquetting are the best secondary environmental measures for metallurgical industry.

keywords Iron and steel industry, environment protection, wastes, emissions, sewage, agglomeration, open-hearth smelting, basic oxygen smelting, rolling
References

1. Scaife P., Nunn J., Cottrell A., Wibberley L. Towards sustainable steelmaking. ISIJ International. 2002. Vol. 42. pp. S5–S9.
2. Reuter M. A., Verhoef E., Dijkema G. P. J., Villeneuve J. Life cycle assessment for the metals cycle in the context of waste policy. Geosciences. 2005. No. 1. pp. 42–47.
3. Dahmen B. Energie- und Ressourceneffizienz bei der Stahlherstellung. Stahlmarkt. 2008. Vol. 58, No. 4. pp. 40–41.
4. Butorina I. V. Emelyanova E. S. Vliyanie kolichestva pererabatyvaemogo loma na ekologicheskie pokazateli metallurgicheskogo kombinata (Influence of quantity of processed scrap on ecological indices of metallurgical combine). Novye tendentsii ratsionalnogo ispolzovaniya vtorichnykh resursov i problemy ekologii (New tendencies of rational use of secondary resources and ecological problems). Moscow : MISiS, 2012. pp. 15–17.
5. Belov Yu. A. Chernye Metally — Ferrous metals. 2003. No. 9. pp. 12–16.
6. Butorina I. V. Izvestiya vuzov. Chernaya metallurgiya — Steel in Translation. 2004. No. 7. pp 66–70.
7. Butorina I. V. Chernye Metally — Ferrous metals. 2003. No. 11. pp. 12–16.
8. Butorina I. V. Izvestiya vuzov. Chernaya metallurgiya — Steel in Translation. 2004. No. 5. pp. 12–15.
9. Best Available Techniques Reference Document on the Production of Iron and Steel. Integrated Pollution Prevention and Control (IPPC). Brussel : European Commission, 2001. 355 p.
10. Ma Jin-fang, Wan Lei, Jia Guo-li, Zhang Hai-bin. Discuss on operation of large-scale BF with low fuel rate. The 5 International Congress on the Science and Technology of Ironmaking. Shanghai, October 19-23, 2009 : Technical Program. Beijing, 2009. pp. 623– 627.
11. Vorobev N. I., Zinurov I. Yu., Shchetinin A. P., Feldman V. Z., Shumakov A. M., Ulitin D. A., Nemytov V. S. Elektrometallurgiya — Electrical Metallurgy. 2003. No. 1. pp. 9–13.
12. Butorina I. V. Stal — Steel in Translation. 2011. No. 1. pp. 84–88, 93.
13. Malinovskiy V. S., Malinovskiy V. D., Vlasova I. B., Davydov V. P., Kaplun M. Ya., Valdberg A. Yu. Elektrometallurgiya — Electrical Metallurgy. 2012. No. 9. pp. 40–43.
14. Simonyan L. M., Khilova O. A. Elektrometallurgiya — Electrical Metallurgy. 2001. No. 7. pp. 37–39.
15. Energie sparen bei der Stahlherstellung. HTM: Journal of Heat Treatmwnt and Materials. 2010. Vol. 65, No. 3. pp. A14.
16. Shults L. A. Alternativnyy variant elektrostaleplavilnoy pechi s shakhtnymi podogrevatelyami i otsenka ee energo-ekologicheskoy effektivnosti (Alternative way of electric furnace with shaft heaters and estimation of its energy-ecological efficiency). Trudy 16 Mezhdunarodnoy konferentsii «Teplotekhnika i energetika v metallurgii». Dnepropetrovsk, 4–6 oktyabrya, 2011 (Proceedings of the 16 International conference “Heating engineering and power engineering in metallurgy”. Dnepropetrovsk, October 4–6, 2011). Dnepropetrovsk, 2011. pp. 220–222.
17. Shults L. A., Kochnov Yu. M., Kochnov M. Yu., Kryuk A. B., Portaresko V. V. Otsenka kachestvennykh i kolichestvennykh pokazateley tekhnologicheskikh gazov krupnotonnazhnykh dugovykh elektrostaleplavilnykh pechey (Estimation of qualitative and quantitative indicators of technological gases of large-capacity arc electric furtnaces). Trudy 3 Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Metallurgicheskaya teplotekhnika: istoriya, sovremennoe sostoyanie, budushchee. K stoletiyu so dnya rozhdeniya M. A. Glinkova». Moskva, 1-3 fevralya, 2006 (Proceedings of the 3 International scientifi c-practical conference “Metallurgical heating engineering: history, modern status, future. To the 100 anniversary of M. A. Glinkov”. Moscow, February 1-3, 2006). Moscow, 2006. pp. 646–655.
18. Butorina I. V., Ulamov Yu. V. Chernye Metally — Ferrous metals. 2013. No. 8. pp. 23–27.
19. Mazur V. L., Ryabov A. I., Mazur V. V. Metallurgicheskaya i gornorudnaya promyshlennost — Metallurgical and Mining Industry. 2011. No. 2. pp. 80–83.
20. Mazur V. L., Ryabov A. I., Mazur V. V. Proizvodstvo Prokata — Rolled Products Manufacturing. 2009. No. 1. pp. 34–38.
21. Emelyanova E. S., Butorina I. V. Metallurg — Metallurgist. 2010. No. 10. pp. 54–56.

Language of full-text russian
Full content Buy
Back