Journals →  Chernye Metally →  2013 →  #2 →  Back

Development of metallurgy in Russia and CIS
ArticleName Simulation of slitting of coiled steel at multi-disk shears of coil slitting lines
ArticleAuthor A. V. Kolobov, E. S. Fedotov, N. L. Lisunets, A.G. Radyuk, A.I. Vinogradov.
ArticleAuthorData

“Severstal” (Cherepovets, Russia):

Kolobov A. V., Cand. Eng., Senior Manager

 

“Severstal TPZ-Sheksna” LLC (Cherepovets, Russia):
Fedotov E. S., Manager for Technology and Quality

 

National University of Science and Technology “Moscow Institute of Steel and Alloys” (MISiS) (Moscow, Russia):
Lisunets N. L., Cand. Eng., Assist. Prof. of the Chair “Technology and Equipment of Tubemaking”, lisunets@yandex.ru
Radyuk A. G., Dr. Eng., Leading Research Fellow of the Chair “Technology and Equipment of Tubemaking”

 

Cherepovets State University — Federal State Budgetary Educational Institution of Higher Professional Education (FSBEI HPO) (Cherepovets, Russia):
Vinogradov A. I., Cand. Eng., Assist. Prof. of the Chair “Machines and Units of Metallurgical Works”

Abstract

At present time, multi-disk shears mounted in the coil slitting lines (CSL) are used for slitting of coiled steel in manufacture of electric welded tubes of small and medium diameter from tube strip billet. In the conditions of wide strip dimension and steel grade range production, transition from one tube strip size to another with varying of steel grades and its mechanical properties is connected with additional adjusting of technological process parameters for providing the required quality. It is possible to manage the process on the base of the developed generalized model that is built on the results of statistical processing of the passive production experiment and allows to adjust parameters of equipment. Mathematical models of the process of slitting of coiled strip at the coil slitting lines using “Statistika” program have been built based on the results of processing of experimental data as regression equations for the following controlled parameters: gap between shears, overlapping of shears, strip speed, specific tension at uncoiler; it allows to improve line adjusting for fabrication of billets with other dimensions. Recommendations for minimizing of trapezium value and cutting angle are given; they can be used in slitting of coiled strip at the coil slitting lines. These recommendations have been tested in slitting of coiled steel to tube strip billets of 10ХСНД (10KhSND) steel for Tikhvinsky freight car building plant and can be used as generalized model of the process of slitting of coiled steel at multi-disk shears during different production and adjusting stages at coil slitting lines.

keywords Rolling, coil slitting, multi-disk shears, tube strip billet, mechanical properties, electric-welded tubes, tube steels
References

1. Tselikov A. I., Polukhin P. I., Grebenik V. M. et al. Mashiny i agregaty metallurgicheskikh zavodov. V trekh tomakh. Tom 3. Mashiny i agregaty dlya proizvodstva i otdelki prokata. Uchebnik dlya vuzov (Machines and aggregates of metallurgical plants. In three volumes. Volume 3. Machines and aggregates for manufacturing and finishing of rolled metals. Tutorial for universities). Moscow : Metallurgiya, 1981. 576 p.
2. Babkin A. G., Lozovoy V. N., Zagumennov O. V. Metallurg — Metallurgist. 2007. No. 9. pp. 37–38.
3. Raskatov E. Yu. Issledovanie protsessa i razrabotka sposoba rezki tonkikh polos iz transformatornykh staley. Dissertatsiya … kandidata tekhnicheskikh nauk (Research of the process and development of method of thin bars cutting from transformer steels. Dissertation ... of Candidate of Engineering Sciences). Ekaterinburg, 2002. pp. 29.
4. Borovkov A. A. Matematicheskaya statistika (Mathematical statistics). Novosibirsk : Nauka, 1997. 772 p.
5. Pugachev V. S. Teoriya veroyatnostey i matematicheskaya statistika (Probability theory and mathematical statistics). Moscow : Nauka, 1979. 496 p.
6. Borovikov V. P., Borovikov I. P. STATISTICA. Statisticheskiy analiz i obrabotka dannykh v srede Windows (STATISTICA. Statistical analysis and data processing in Windows). Moscow : Informational and Publishing House “Filin”, 1997. 608 p.
7. Kolobov A. V., Fedotov E. S., Lisunets N. L. et al. Izvestiya vuzov. Chernaya metallurgiya — Steel in Translation. 2012. No. 1. pp. 17–19.

Language of full-text russian
Full content Buy
Back