“Tsvetnye Metally” (transl.: Non-ferrous metals Journal) is the leading Russian monthly journal devoting to all problems of non-ferrous metallurgy (heavy metals, rare metals, light metals, noble metals, carbon materials, metal processing etc). Published since 1926, since 1997 has been included in "Ore and Metals" Publishing House. Volume up to 104 pages, circulation up to 1,500 copies. ISSN 0372-2929.

Its thematic plan covers all directions of scientific and technical development in non-ferrous metallurgy. The main journal sections include scientific-technical papers on heavy and light non-ferrous metals, noble metals and alloys, rare and rare earth metals, carbon materials, composites and multi-functional coatings, radioactive elements, nanostructured metals and materials, metal forming, automation etc. Theoretical and practical problems of ore mining and mineral processing, production and processing of non-ferrous metals, complex usage of ores, economics and production management, automation of metallurgical processes are widely observed in this journal.

"Tsvetnye Metally" journal publishes the papers of well-known scientists and leading metallurgists, elucidates important scientific-technical problems of development of concentrating and metallurgical enterprises, scientific-research institutes and universities in the field of non-ferrous metallurgy, presents new scientific directions and technical innovations in this area. The readers can find in this journal both the articles with applied investigations and with results of fundamental researches that make the base for new technical developments. "Tsvetnye Metally" publishes on regular base information about multiple scientific conferences and technical fairs devoted to the problems of non-ferrous metallurgy. It is internation partner and sponsor of more than 20 such international events.

 

"Non-ferrous Metals" is an expert peer-review edition; its editorial board incorporates leading and respectable scientists and practical specialists of non-ferrous metallurgy (38 Doctors of Engineering from total number of 57 member including 5 foreign specialists from Germany, Canada, Australia, Finland and Mongolia); it provides excellent expertise of published articles.


Actual address: Office 624, Leninsky prospekt 6, bld. 2
(Moscow Institute of steel and alloys, bld. A), Moscow, 119049 Russia
Mailing address: P.O. Box No. 71, Moscow, 119049, Russia
Phone / Fax: +7-495-955-01-75, 8 (926) 504-8975
E-mail: tsvetmet@rudmet.ru
Internet: www.rudmet.ru

Founders:

“Ore and Metals” Pubishing House
National University of Science and Technology “MISIS”

With Participation of “Norilsk Nickel” Mining and Metallurgical Company, National Research Tomsk Politechnic University, National Research Nuclear University “MEPhI”, State Hermitage Museum.
With Assistance of Navoi Mining & Metallurgy Combinat, Scientific and Design Association “RIVS”, Scientific and Engineering Union on Mining, Geology and Metallurgy (Republic of Bulgaria).

Editor-in-Chief – Yury Korol
First Deputies-Editor-in-Chief – Anatoly Sysoev
Deputy Editor-in-Chief – Alexander Vorobiev
Editorial Coordinator – Natalia Sharkina
Leading editor – Anastasia Sleptsova

 

Editorial board:

Abisheva Z. S., D. Eng., Prof., academician of NAS RK, Director of Mining and Metallurgical Institute, Almaty, Kazakhstan;
Akchurin R. Kh., D. Eng., Prof., Lomonosov Moscow State Academy of Fine Chemical Technology, Vladivostok, Russia;
Astakhov M. V., D. Ch., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of Physical Chemistry, Moscow, Russia;

Bazhin V. Yu., D. Eng., Prof., Head of Chair of Automation of Technological Processes and Production Facilities, National Mineral Resources University, Saint Petersburg, Russia;

Belov N. M., D. Eng., Prof., National Reshearch Technological University "MISiS", Moscow, Russia;
Bocharov V. A., D. Eng., Prof., Moscow State Mining University, Chair of Mineral Processing, Moscow, Russia;
Boyarko G. Yu., D. Ec., Prof., Tomsk Polytechnic University - National Research University of Resource-Efficient Technologies, Chair of General and Economical Geology, Tomsk, Russia;

Brichkin V. N., D. Eng., Prof., Head of Chair Metallurgy, National Mineral Resources University, Saint Petersburg, Russia;
Bryukvin V. A., D. Eng., Prof., Institute of Metallurgy and Material Science of the Russian Academy of Sciences, Moscow, Russia;
Bykasov A. A., Vice Governor of Volgograd Region for Business, Industry and Trade, Moscow, Russia;

Chernov I. I., Phys.-Math. Dr., Prof., the chair "Physical problems of material science", National Research Nuclear University "MEPHI", Moscow, Russia;

Dmitriev V. A., C. Eng., Director, Krasnoyarsk Works of Non-ferrous Metals, Krasnoyarsk, Russia;
Drits A. M., Executive Officer on the Development of Business and New Technologies, Alcoa Russia, Moscow, Russia; Head of the Moscow Office, "Alcoa Samara Metallurgical Plant" JSC, Moscow, Russia.

Eroshevich S. Yu., Deputy Director of Technological Policy and Industrial Ecology of Polar Division, OJSC “MMC “Norilsk Nickel”, Norilsk, Russia;

Fedorov A. N., C. Eng., Prof., National Reshearch Technological University "MISiS", Moscow, Russia;
Genevski V. V., D. Eng., Deputy Chairman, Scientific and Engineering Union on Mining, Geology and Metallurgy;

Glazunov L. A., D. Eng. Prof., "Gintsvetmet" State Scientific-Research Institute of Non-Ferrous Metallurgy, Moscow, Russia;
+Gnedin Yu. F., C. Eng., Expert, Moscow Electrode Works, Moscow, Russia;

Ignatkina V. A., Doctor of Engineering Sciences, Professor, National University of Science and Technology «MISiS», Moscow, Russia

Isaenkova M. G., Phys.-Math. Dr., Prof., the chair "Physical problems of material science", National Research Nuclear University "MEPHI", Moscow, Russia;
Kalchenko V. S., "Aluminium" Non-commercial Partnership (now retired), Moscow, Russia;

Kireev S. V., Doctor of Physical and Mathematical Sciences, Professor, Dean of a Faculty of In-Service Education and Continuing Education, National Research Nuclear University (Moscow Engineering Physics Institute) (MEPHI), Moscow, Russia;

Kiselev B. G., C. Ec., Ass. Prof., Chief Executive Officer, "SPONK" Designing and Consulting Company, Moscow, Russia;

Kirov S. S., C. Eng., Assistant Professor of a Chair of Non-Ferrous Metals and Gold, National Reshearch Technological University "MISiS", Moscow, Russia;
Korneev S. I., C. Ec., Senior Analyst of "Managing Company "Metalloinvest" LLC, Moscow, Russia;
Korol Yu. A., Vice President for Production Control and Investment, "Russian Copper Company" JSC, Ekaterinburg, Russia;

Kotlyar B. A., C. Ec., Chief Executive Officer, "TsNOTORGMET" Consulting-Analytical Center, Moscow, Russia;

Kotlyar Yu. A., Candidate of Engineering Sciences, Councilor of Chief Executive Officer of «Norilsk Nickel» MMC, Moscow, Russia;

Kozlov P. A., D. Eng., Head of an Engineering Center, OJSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia;

Kryukovskiy V. A., D. Eng., Professor, New Projects Councilor, «RUSAL Global Management B. V.» JSC, Moscow, Russia;

Lebed A. B., D. Eng., Senior Scientific Researcher, Head of Chair Metallurgy, UMMC Technical University, Ekaterinburg, Russia;

Larichkin F. D., D. Ec., Prof., Director, Luzin Institute of Economical Problems, The Kola Centre of the Russian Academy of Sciences, Apatity, Russia;
Levashov E. A., D. Eng., Academician of Russian Academy of Natural Sciences, Prof.,Director, National Research Technological University "Moscow Institute of Steel and Alloys",Head of theChair of Powder Metallurgy and Functional Coatings, Moscow, Russia;

Levinskiy Yu. V., D. Eng., Prof., Acting Head of the Chair "Chemistry and Technology of Nanosized and Composite Materials", Lomonosov Moscow State Academy of Fine Chemical Technology, Moscow, Russia;
Makarov G. S., D. Eng., Prof., Independent Expert, Moscow, Russia;
Maltsev N. E., C. Eng., Deputy Chief Executive Officer, "Soyuztsvetmetavtomatika" Institute of Automation in Non-ferrous Metallurgy, Moscow, Russia;

Mansurov Yu. N., Doctor of Engineering Sciences, Professor, Head of a Chair «Material Science and Material Technology», Federal Expert on Science and Technology Issues, Head of the Basic Education Programs «Innovatika», «Material Science and Material Technology» and «Art Materials Processing Technology», Expert (Vladivostok, Russia);

Meretukov M. A., Doctor of Engineering Sciences, Professor, Scientific Consultant, Prague, Czech Republic;
Moskvitin V. I., D. Eng., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of metallurgy of Non-ferrous Metals and Gold, Moscow, Russia;

Mitsyk A. M., Deputy CEO, RUSAL Accounting Center, Moscow, Russia.
Naboychenko S. S., Doctor of Engineering Sciences, Professor, Head of a Chair of Heavy Non-ferrous Metals Metallurgy, Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia;

Nikolaev A. I., Doctor of Engineering Sciences, Professor, Deputy Director on Scientific Work, I. V. Tananaev Instituteof Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Scientific Center of Russian Academy of Sciences), Head of the Department of the Center of Nanomaterials of Kola Scientific Center of Russian Academy of Sciences, Apatity, Russia;
Pronnikov V. V., Specialist, "Polygon-Taimyr" Company, Moscow, Russia;
Ptitsyn A. N., D. Eng., Prof., Chair of Innovation Designing, National University of Science and Technology "MISIS", Moscow, Russia;
Rumyantsev V. K., D. Eng., State Scientific-Research Institute of Hard Alloys (now retired), Moscow, Russia;
Ryzhov A. G., C. Eng.,Deputy Head of Administration – Head of Department, Open Joint Company "Mining and Metallurgical Company "Norilsk Nickel", Department of Production Management, Sector of Raw Materials and Tolling Operations, Moscow, Russia;

Safin F. M., Doctor of Economic Sciences, Candidate of Philosophical Sciences, Professor (Kazan State University of Culture and Arts), Head of a Chair of Social-Culture Management, Kazan, Russia;

Selivanov E. N., D. Eng., Head of Laboratory of Non-ferrous Metals Pyrometallurgy;

Shapirovskiy M. R., Candidate of Engineering Sciences, JSC «Soyuztsvetmetavtomatika», Moscow, Russia;

Sharkina N. V., Editorial Coordinator, "Tsvetnye Metally" journal, Moscow, Russia;
Shchegolev V. I., Independent Expert, "SMV Engineering" company, Moscow, Russia;
Strizhko L. S., D. Eng.,Head of the Chair of Non-ferrous Metals and Gold,Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Moscow, Russia;
Sysoev A. V., D. Eng., Prof., Head of the Board of Directors, Legislative Parliament of Sverdlovsk Region, Committee of Industrial and Agricultural Policy and Natural Resources, Yekaterinburg, Russia;

Tarasov A. V., Doctor of Engineering Sciences, Professor, Chief Executive Officer of «RT-Metallurgiya» JSC, Counsellor of Chief Executive Officer of Scientific Work of «Gintsvetmet» Institute, Moscow, Russia;
Tsemekhman L. Sh., D. Eng., Prof., Counsellor of Chief Executive Officer, "Gipronickel" State Scientific-Research and Desifning-Engineering Institute of Nickel and its Products, Saint Petersburg, Russia;
Tsymbulov L. B., D. Eng., Prof., Head of Laboratory of Metallurgy, "Gipronickel" State Scientific-Research and Desifning-Engineering Institute of Nickel and its Products, Saint Petersburg, Russia;
Voldman G. M., D. Ch., Prof., Moscow Institute of Fine Chemical Technology, Chair of Chemistry and Technology of Nano-sized and Composite Materials, Moscow, Russia;
Vorobiev A. G., D. Ec., Deputy Chief Editor "Tsvetnye Metally" journal, Chief Editor, "Ore and Metals" Publishing House, Moscow, Russia;
Vorobyev-Desyatovsky N. V., D. Ch., Prof., Head of the Department of Hydrometallurgy, "Polymetal Engineering", Saint Petersburg, Russia;

Zinoviev A. V., D. Eng., Prof., National Research Technological University "MISiS", Moscow, Russia.


Foreign members of the editorial board:

Prof., Dr. David Dreisinger, B.A.Sc., Ph.D., P.Eng. Head of Industrial Reserch Chair in Hydrometallurgy, Department of Materials Engineering, Faculty of Applied Science, University of British Columbia in Vancouver, Canada;
Prof. Evgeny Jak, "Pyrosearch" Metallurgical Center, University of Queensland (Brisbane, Australia);
Dr. Kari Knuutila, Senior Vice President and Chief Technological Officer, Outotec Oyj, Finland;
Prof., Dr-Ing. Bernd Friedrich, Director of IME Process Metallurgy and Metal Recycling, Department and Chair of RWTH Aachen, Germany;
Prof., Dr. Zh. Baatarkhuu, Deputy Chief of Production and Technical Department, Chief Preparator of Erdenet (Mongolia)
Dr. Eng. Vladimir V. Genevski, Vice-Chairman, The Scientific and Technical Union of Mining, Geology and Metallurgy, Bulgaria

Topic themes:

- Economics and management of production;
- Beneficiation;
- Heavy non-ferrous metals;
- Noble metals and alloys;
- Light metals, carbon materials;
- Rare metals, semiconductors;
- Composites and multipurpose coatings;
- Radioactive elements;
- Nanostructured metals and materials;
- Metal processing;
- Automation;
- Chronicle.

Based on resolution of the Supreme Attestation Committee (VAK) of the Ministry of Education of the Russian Federation, the journal is included in the “List of periodical and scientific-technical editions published in the Russian Federation, where publication of the main results of Doctor’s theses are recommended” for the theme of deposit development of solid mineral resources and for the themes of metallurgy, economics and chemistry.

In 2013, the journal «Tsvetnye Metally» was included into the international bibliographic and abstract database Scopus, which is an instrument for tracking of scientific articles' citedness. The Ministry of education and science of Russian Federation considers the Scopus database as a criterion of estimation of efficiency of activity of higher education institutes.