Журналы →  Chernye Metally (Ferrous metals) →  2017 →  №4

Chernye Metally (Ferrous metals)


The 4th issue of “Chernye Metally” journal (2017) contains the most of its conventional sections. It is opened, as usual, by the section “Iron and steel news of the world” and “News of metallurgical companies”.


The section “Ironmaking” makes the readers acquainted with innovations of Salzgitter Flachstahl GmbH in the field of radar-locating measurements in the blast furnace. The new sensors are more cheap, efficient and reliable in comparison with the measuring systems mounted in 2005.


The section “Steel making” presents calculations for determination of metal scrap volume using 3-D camera with time-of-flight sensor in the conditions of Magnitogorsk Iron and Steel Works. Another article in this section is devoted to modern tendencies of refractory production providing implementation of the efficient melting processes for high-quality steels.


Review of AHSS steels with increased Mn content and evaluation of potential opportunities for manufacturing products of these steels are presented by Primetals Technologies in the section “Continuous Casting”. Production of hot-rolled strip is realized here by ESP (Endless Strip Production) Arvedi technology.


P. Paderin, technical expert of the United metallurgical company has discussed in his article necessity of development of thermodynamics of carbon solutions in liquid iron. The quasi-regular solution model of carbon at all its concentration values in liquid iron was built in order to calculate carbon activity in temperature range 1400 °C – 1600 °C.


Metal forming thematics is presented in this issue by publications about the calculation method for sheet straightening force parameters in 8-roll unit (National University of Science and Technology “MISiS”), about putting into practice the new adjusting concept for hot rolling finishing stands (Primetals Technologies), about cross-wedge rolling with 20% steel saving (IPH Institute), about Scada quality control system during rolls heat treatment (Siemens AG).


The leaching technology allowing to extract titanium carbide from waste materials is described in the section “Power engineering and ecology”.


The issue also includes publications in the following sections: “Steel as material” and “Economics and finances”.


You may find below more details about the issue or book printed or electronic version of the journal.

Название Iron and Steel News of the World
News of Metallurgical Companies
Название New metallurgical plant of Tata Steel
Название New continuous caster for billets operated by AG der Dillinger Hüttenwerke
Название Compact saw for billet cutting presented by Framag Industrieanlagenbau
Источник Framag Industrieanlagenbau GmbH
Название Safety of production processes due to remote monitoring: innovation of Oerlikon Leybold Vacuum GmbH
Источник Oerlikon Leybold Vacuum GmbH
Название Safe and flexible remote access to machines and units is suggested by Siemens
Название Chernye Metally: now included in Scopus!
Название Radar-locating measurements in a blast furnace increasing its efficiency
Автор C. Schulz
Информация об авторе

Endress + Hauser Messtechnik GmbH & Co. KG (Weil am Rhein, Germany):

Schulz C., Prof., e-mail: philippe.metzger@de.endress.com

Steel making
Название Calculation of bulk density of steel scrap in scrap chutes using 3D camera
Авторы E. N. Ishmetyev, D. V. Chistyakov, A. N. Panov, E. E. Bodrov, D. V. Rabadzhi
Информация об авторах

“KonsOM SKS” JSC (Magnitogorsk, Russia):

Ishmetyev E. N., Dr. Eng., Director on Strategic Development
Chistyakov D. V., Cand. Soc., Executive Director
Panov A. N., Cand. Eng., Ass. Prof., Head of Dept. of Innovations


Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
Bodrov E. E., Cand. Eng., Ass. Prof., Chair of Electronics and Microelectronics,


Magnitogorsk Iron and Steel Works (Magnitogorsk, Russia):
Rabadzhi D. V., Prof

E-mail (common): fortheartist@mail.ru

Название The tendencies of the development of steel production technology with high purity and manufacture of refractories
Авторы A. Buhr, R. Bruckhaus, R. Fandrich, Ch. Dannert
Информация об авторах

Almatis GmbH (Frankfurt, Germany):

Buhr A., Dr., Global Technical Director Refractories, e-mail: andus.buhr@almatis.com


AG der Dillinger Hüttenwerke (Dillingen, Germany):
Bruckhaus R., Dr. Eng., General Manager Steel Plant


VDEh Steel Institute (Düsseldorf, Germany):
Fandrich R., Dr. Eng., Manager Steelworks Technology


Forschungsgemeinschaft Feuerfest e. V. (Höhr-Grenzhausen, Germany):
Dannert Ch., Dr., Head of Research and Development

Continuous Casting
Название Manufacture of improved high-strength steels via Arvedi ESP technology
Авторы B. Linzer, A. Rimnac, S. Bragin, Bo Yang
Информация об авторах

Primetals Technologies (Linz, Austria):

Linzer B., Head of Technology Endless Strip Production, e-mail: bernd.linzer@primetals.com
Rimnac A., Bragin S., Yang Bo, Technology Experts Endless Strip Production

Metal science and metallography
Название Thermodynamics of carbon solutions in liquid iron
Автор P. S. Paderin
Информация об авторе

United Metallurgical Company (Moscow, Russia):

Paderin P. S., Cand. Eng., Technical Expert, e-mail: Ppaderin@omk.ru

Rolling and Other Metal Forming Processes
Название Calculation of bending moments of steel sheet and support reactions under flattening on the eight-roller straightening machine
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS” (Moscow, Russia):

Shinkin V. N., Dr. Phys.-Math., Prof., e-mail: shinkin-korolev@yandex.ru

Название ESP strip rolling in the finished group accompanying with its dynamic adjustment
Авторы D. Kotzian, A. Gruβ
Информация об авторах

Primetals Technologies (Erlangen, Germany):

Kotzian D., e-mail: daniel.kotzian@primetals.com

Grüβ A.

Название 20 % steel saving in Common-Rails system production via cross-wedge rolling
Авторы Th. Blohm, S. Reichert
Информация об авторах

Institute for Integrated Production Hannover — IPH (Hannover, Germany):

Blohm Th., Mag. Eng., Project Engineer
Reichert S., Bach. Eng., PR Department, e-mail: reichert@iph-hannover.de

Название Scada-system for quality control in roll production
Автор D. Wagner
Информация об авторе

Siemens AG (Nuremberg, Germany):

Wagner D., Mag. Econ., Factory Automation, e-mail: dirk.dw.wagner@siemens.com

Power engineering and ecology
Название Titanium carbide extraction from industrial wastes
Авторы K. de Paula Cunha Titze, M. Kozariszczuk, M. Werner, A. van Bennekom, H. Hill
Информация об авторах

VDEh Institute of Industrial Research (Düsseldorf, Germany):

de Paula Cunha Titze K., Eng., Head of the Project

Kozariszczuk M., Dr. Eng., Head of Department “Resourcesaving technologies in liquid media”, Direction “Power- and resource-saving technologies”, e-mail: matthias.kozariszczuk@bfi.de
Werner M., Dr. Eng., Head of the Project, Department “Resourcesaving technologies in liquid media”, Direction “Power- and resource-saving technologies”


Edelstahlwerke GmbH (Krefeld, Germany):
van Bennekom A., Dr. Eng., Head of Department “Materials with special properties”
Hill H., Dr. Eng., Specialist on Development, TKB and Quality

Steel as material
Название Perspective innovations of steel as construction material
Автор P. Dahlmann
Информация об авторе

VDEh Steel Institute (Düsseldorf, Germany):

Dahlmann P., Dr. Eng., Member of Board, e-mail: peter.dahlmann@vdeh.de

Economics and finances
Название 2016 as the decisive year for the iron and steel industry
Автор H. J. Kerkhoff
Информация об авторе

“Steel” Economical Union (Düsseldorf, Germany):

Kerkhoff H. J., President, e-mail: redaktion@stahleisen.de

Название Economical consequences of weakening of the German iron and steel industry
Название More risks than chances: weakening of the sanctions against Iran
Автор Wichert P.
Информация об авторе

Economical Union “Steel” (Düsseldorf, Germany):

Wichert P., Mag. Econ., e-mail: peter.wichert@wvstahl.de

Журналы →  Chernye Metally (Ferrous metals) →  2017 →  №4