Journals →  Chernye Metally →  2016 →  #10

Chernye Metally


The 10th issue of “Chernye Metally” journal, 2016 is opened by its conventional sections “Iron and steel news of the world” and “News of the metallurgical companies”.


This issue contains the section “Steel making”, as the previous one. The article by S. Roedl et al. About the new technology of inert gas blowing during ladle treatment, in order to rise its cleanness in the conditions of Siegen plant of Deutsche Edelstahlwerke seems to be most interesting.


However, “Rolling and metal forming” is the mein section in this issue. The problems of optimization of flat and section rolling on the base of intensive alternating deformation have been examined by the specialists of Ural Federal University (A. Bogatov, D. Nukhov, I. Leshchev). Another paper is devoted to technological improvements in hexagonal seamless tube production made of boron-containing steels at Chelyabinsk Pipe Rolling Plant, with participation of researchers from the Moscow Technological University and National University of Science and Technology “MISIS”. V. Peretyatko, S. Smetanin and A. Yuryev have presented the joint investigation of Siberian State Industrial University and EVRAZ Consolidated West-Siberian Metallurgical Plant in the field of tram rail rolling in four-roll passes. S. Schwarz and J. von der Heiden from Friedrich Kocks have observed innovations in production of section steel with SBQ system for size control.


Two technological articles written by the specialists if IVS and St. Petersburg State Mining University were included in the special collection devoted to RIVS-2016 scientific and practical conference. Their themes are improvement of flotation enrichment of hematite ores and hydrometallurgical treatment of zinc-bearing dust in steelmaking production.


The issue also publishes the papers in the sections “Power engineering and Ecology”, “Heating and Heat treatment”, “Steel as Material”. “Economics and Finances”.


You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Iron and Steel News of the World
ArticleName Efficient electric arc furnace of Sharc type
ArticleAuthors A. Metzen, T. Germeshausen, J. Bader, A. Bergs

Hellenic Halyvourgia (Kifissia, Greece):

Metzen A., Technical Director, e-mail:


SMS Group GmbH (Düsseldorf, Germany):
Germeshausem T., Dr.
Bader J.
Bergs A.

ArticleName Actual problems of metal flow in secondary metallurgy
ArticleAuthors B. Heinrich, G. Hackl, H. U. Marschall

Stopinc AG / Interstop (Hünenberg, Switzerland):

Heinrich B., Mag. Eng., Head of Research & Development, e-mail:


RHI AG Technology Center (Leoben, Austria):

Hackl G., Senior Manager
Marschall H. U., Mag. Eng., Dr., Projest Manager

ArticleName Improvement of steel purity parameters in ladle treatment
ArticleAuthors S. Rödl, B. Kleimt, H. Köchner, H.-P. Jung, J.-S. Klung

VSEh Institute of Industrial Researches (Düsseldorf, Germany):

Rödl S., Mag. Eng., Head of Department, e-mail:
Kleimt B., Dr. Eng., Head of Department
Köchner H., Dr. Eng., Head of Department


Deutsche Edelstahlwerke GmbH (Siegen, Germany):
Jung H.-P., Mag. Eng., Head of Department of Technological Innovations STS-P
Klung S., Mag. Eng., Head of Project

ArticleName Scientific and research project AIF of BFI Institute: Optimization of slag produced in the electric arc furnace
Source VDEh Betriebsforschungsinstitut
Metal science and metallography
ArticleName Anomalies in the structure and properties near three vertical lines on the “iron-carbon” diagram by D. K. Chernov
ArticleAuthors K. Yu. Shakhnazarov, E. I. Pruakhin

St. Petersburg State Mining University (St. Petersburg, Russia):

Shakhnazarov K. Yu., Cand. Eng., Ass. Prof., the Chair of Material Science and Technology of Art Objects, e-mail:
Pryakhin E. I., Dr. Eng., Prof., Head of the Chair of Material Science and Technology of Art Objects, e-mail:

Rolling and other metal forming processes
ArticleName Theoretical investigation and scientific substantiation of the flat rolling method on the base of intensive alternating deformation
ArticleAuthors A. A. Bogatov, D. Sh. Nukhov, I. V. Leshchev

Ural Fereal University named after the first RF President B.N. Eltsin (Ekaterinburg, Russia):

Bogatov A. A., Dr. Eng., Prof., Head of the Chair of Metal Forming
Nukhov D. Sh., Junior Scientific Fellow, the Chair of Metal Forming
Leshchev I. V., Junior Scientific Fellow, the Chair of Metal Forming
E-mail (common):

ArticleName Improvement of the production technology for seamless hexagonal tubes made of boron-containing steels
ArticleAuthors K. N. Nikitin, V. Ya. Osadchiy, A. V. Safyanov, A. P. Kolikov, K. E. Bubnov

Chelyabinsk Pipe Rolling Plant (Chelyabinsk, Russia):

Nikitin K. N., Technical Director

Safyanov A. V., Cand. Eng., Technological Engineer, Dept. of Production Researches, e-mail:

Bubnov K. E., Chief Specialist on Seamless Tubes Production


Moscow Technological University (Moscow, Russia):
Osadchiy V. Ya., Dr. Eng., Prof., the Chair «Metal and Plastic Forming», USSR State Award Winner

National University of Science and Technology “MISiS” (Moscow, Russia):
Kolikov A. P., Dr. Eng., Prof.

ArticleName Investigation of regularities of increase and pulling-down the flanges of tram rails during rolling in four-roll passes
ArticleAuthors V. N. Peretyatko, S. V. Smetanin, A. B. Yuriyev

Siberian State Industrial University (Novokuznetsk, Russia):

Peretyatko V. N., Dr. Eng. Prof., Chair of Metal Forming and Metal Science

EVRAZ Consolidated West-Siberian Metallurgical Plant (Novokuznetsk, Russia):
Smetanin S. V., Cand. Eng., Head of the Central Laboratory of automation and mechanization of rail production, e-mail:
Yuryev A. B., Dr. Eng., Managing Director

ArticleName Smart production and process innovation for SBQ production
ArticleAuthors S. Schwarz, J. von der Heiden

Friedrich Kocks GmbH & Co. KG (Hilden, Germany):

Schwarz S., General Manager Sales
von der Heiden J., Marketing Manager, e-mail:

ArticleName Open forging and rolling of rings made of hardly deformable metals
Power Engineering and Ecology
ArticleName Development of projects aimed on efficiency of resource usage
ArticleName Establishment of the net “Power efficiency of electric steel making” at the conference in Dusseldorf
ArticleName ThyssenKrupp Steel Europe and HKM created power efficiency net
ArticleName Large components for a bag dust collector at ThyssenKrupp plant in Schwelgern
Scientific-practical conference RIVS–2016
ArticleName Intensification of reverse cation flotation of hematite ores owing to optimization of technological procedure and flotator hydrodynamic parameters
ArticleAuthors O. Yu. Poperechnikova, E. N. Shumskaya

CJSC “IVS”, Joint Venture (St. Petersburg, Moscow):

Poperechnikova O. Yu., Head of the Sector on Technological Researches of Mineral Raw Materials, e-mail:
Shumskaya E. N., Cand. Eng., Leading Scientific Fellow

ArticleName Chemical concentration of steelmaking dusts
ArticleAuthors G. V. Petrov, A. Ya. Boduen, A. A. Popov, S. B. Fokina

St. Petersburg State Mining University (St. Petersburg, Russia):

Petrov G. V., Dr. Eng., Prof., Chair of Metallurgy
Boduen A. Ya., Ass. Prof., Chair of Metallurgy, Leading Engineer of Hydrometallurgical Dept., e-mail:
Fokina S. B., Cand. Eng., Assistant, Chair of Metallurgy, e-mail:


CJSC “IVS”, Joint Venture (St. Petersburg, Moscow):
Popov A. A., Cand. Eng., Technologist Engineer

Heating and Heat Treatment
ArticleName Technological leadership owing to innovative heat treatment technology
ArticleAuthor E. Lange

SMS Siemag AG (Düsseldorf, Germany):

Lange E., Technical Journalist, e-mail:

Steel as material
ArticleName Steel innovations and development of up-to-date transporting infrastructure
ArticleAuthor E. Lange

Verlag Stahleisen (Düsseldorf, Germany):

Lange E., Technical Journalist, e-mail:

ArticleName High quality steel for water supply facilities
ArticleName Steel facade for the technical museum in Freudenberg
ArticleName Tinplate, the most recyclable packing material
Economics and finances
ArticleName Improved version of business plans and delivery system for metal producers
ArticleAuthor A. Heeres

Quintiq (Hertogenbosch, Netherlands):

Heeres A., Chief Operating Officer, e-mail:

Our anniversaries
ArticleName 70th anniversary of Boris Alekseevich Romantsev
Journals →  Chernye Metally →  2016 →  #10