Журналы →  Chernye Metally →  2015 →  №8

Chernye Metally


The No. 8 issue of "Chernye metally" journal is opened by the conventional section "Development of metallurgy in Russia and other CIS countries".


V. S. Dub, A. N. Romashkin and other specialists from TsNIITMASH Institute have presented the large review devoted to development of steel ingot casting technology. All stages of this technological chain, that are required for providing proper quality of steel ingots in correspondence with up-to-date machine-building standards, are displayed.


Another review describing the current state of national rolling production has been prepared by S. V. Rodinkov and A. M. Kriventsov, the specialists of VNIIMetMash Institute. The brief survey of the projects of rolling equipment that are now under preparing in this scientific-technical and engineering-designing center is given.


The problems of complete preparation and training of designing engineers, meeting the requirements of the current industrial development, are elucidated in the paper by A. B. Netkachev et al. from the Institute of Material Science and metallurgy of the Ural Federal University and Uralgipromez. The authors substantiated necessity of preparing of the project chief engineers, or managers on development of industrial complexes.


The section "Iron and Steel Production" includes two papers. The first of them is an economical review and examines the challenges and ways of the European iron and steel industry from the customer's point of view, while the second is scientific-technical one, presenting the results of the research project of ArcelorMittal Hamburg GmbH and the Institute of Automation of Helmut Schmidt University in Hamburg. This project was devoted to the model of adjusting of DRI feed intensity during charging in the electric arc furnace.


Three articles are located in the section "Surface coating and processing". M. Nörteshauser and his colleagues from the leading European steel producers have described their experience about usage of control systems for surface quality of steel products at their works in Ijmuiden, Linz, Salzgitter, Duisburg, Bremen and Hagen. I. Trenkner has analyzed possibilities of usage of the new MagiZinc zinc-magnesium coating produced by tat Steel for automotive industry. The problem of drying of strip coating using infrared rays has been investigated in the paper by M. Angerstein.

Wide possibilities of efficient steel usage as material in different fields are presented also in this issue, as well as two actual analytical reviews by H. J. Kerkhoff, the President of "Steel" economical union.


You may find below more details about the issue or book printed or electronic version of the journal.

Development of metallurgy in Russia and CIS
Название Development of steel ingot casting technology
Авторы V. S. Dub, A. N. Romashkin, A. N. Malginov, I. A. Ivanov
Информация об авторах

State Research Center «CNIITMASH» (Moscow, Russia):

Dub V. S., Dr. Eng., Scientific Director of the Institute of Metallurgy and Machine-Building, oms@cniitmash.ru
Romashkin A. N., Cand. Eng., Head of large Ingot Lab., an_romashkin@cniitmash.ru
Malginov A. N., Scientific Fellow, anmalginov@mail.ru
Ivanov I. A., Cand. Phys.-Math., Leading Scientific Fellow, ia.ivanoff@gmail.com

Название Several aspects of current development of rolling production in Russia
Авторы S. V. Rodinkov, A. M. Kriventsov
Информация об авторах

All-Russian Scientific and Research Institute of Metallurgical Machinery (Moscow, Russia):

Rodinkov S. V., Cand. Eng., Head opf Rolling Mills Dept., ops-m@rambler.ru
Kriventsov A. M., Dr Eng., Leading Scientific Fellow, sintezproekt@mail.ru

Название Modern industrial development needs in training of specialists for metallurgical works
Авторы A. B. Netkachev, I. S. Plakhotin, S. V. Solovyev, V. V. Shimov
Информация об авторах

Ural State Federal University (Ekaterinburg, Russia):

Netkachev A. B., Ass. Prof., Chair of Metal Forming, Institute of Material Science and Metallurgy, netkachev_ab@mail.ru
Plakhotin I. S., Cand. Econ.
Shimov V. V., Cand. Eng., Prof., Director of metallurgical Dept., Institute of Material Science and Metallurg, yomd@urfu.ru


Uralgipromez ISC (Ekaterinburg, Russia):

Solovyev S. V., Cand. Phys. Math., Head of IT Dept.

Iron and steelmaking
Название Challenges to European steel industry from the custoner’s perspective
Авторы A. Hauger, T. Vietoris, V. Bentfeld
Информация об авторах

Benteler Steel/Tube GmbH (Paderborn, Germany):

Hauger H., Dr. Eng., CEO
Vietoris T., Dr. Eng., Head of Developmenmt Dept.
Bentfeld V., Mag. Sc., Technical Assistant

E-mail (common): steeltube@benteler.com

Название Temperature-based DRI feeding into electric arc furnaces
Авторы M. Andersson, V. Haverkamp, K. Krüger, A. Jüchter, U. Brawn
Информация об авторах

Helmut-Schmidt University (Hamburg, Germany):

Andersson M., Mag. Eng., Scientifi c Fellow, Automation Institute, matthias.andersson@hsu-hh.de
Haverkamp V., Dr. Eng., Inv. Prof., Automation Institute

Max Aicher Unternehmensgruppe (Freilassing, Germany):
Krüger K., Dr. Eng., Prof., honor. Prof., Automation Institute, at p.t. Advisor


ArcelorMittal Hamburg GmbH (Hamburg, Germany):
Jüchter A., Mag. Eng., Head of Steel Mlting Shop & Reduction Unit
Braun U., Dr. Eng., Head of Dept.

Coating and Surface Treatment
Название Optimized Zn–Mg-coating for extra large steel sheets for automotive industry
Автор I. Trenkner
Информация об авторе

PR People International GmbH and Co. KG (Mühlheim an der Ruhr, Germany):

Trenkner I., PR Manager, i.trenkner@pr-people.com

Название Optimization of the coil coating process via drying by infrared rays
Автор M. Angerstein
Информация об авторе

GoGaS Goch GnbH & Co. KG (Dotrmund, Germany):

Angerstein M., Mag. Eng., michael.angerstein@gogas.com

Название M. Nцrtesheuser, J. Brandenburger, K. Jonker, A. Kogler, M. Krдtzner, W. Mimahl, G. Moninger, S. Schultz, S. Wiesemann. Surface inspection systems for steel products
Service and Technical Maintenance
Название For the whole lifetime of the plant — more than a service concept
Авторы P. Tesè, Ch. Häusler
Информация об авторах

SMS Siemag AG (Düsseldorf, Germany):

Tesè P., Mag. Eng., Division Management Service
Häusler Ch., Mag. Eng., Division Management Service

E-mail (common): technical.service@sms-siemag.com

Steel as material
Название From atom to automobile
Автор K. Müllges
Информация об авторе

Cologne, Germany:

Müllges K., Freelance Journalist

Название Pilot engineering project for efficient mobility
Название High-strength and well-formable light steel components
Название New steels provide mass and cost saving for chassis
Название High-tech steels for US automotive industry
Название Construction of automobiles with sun batteries and using light steel components
Название Challenging constructions of stainless steels
Название Decorating of building faces with steel: ice crystals and metallic glitter
Название Steel sculptures showing the way
Название To save lifes with the help of stainless steel
Economics and Finances
Название Politicians needs to change prospects
Автор H. J. Kerkhoff
Информация об авторе

«Steel» Economical Union, VDEh Steel Insrtitute (Düsseldorf, Germany):

Kerkhoff H. J., President and CEO, redaktion@stahleisen.de

Название Steel demand: slight uptake continues
Автор H. J. Kerkhoff
Информация об авторе

«Steel» Economical Union, VDEh Steel Insrtitute (Düsseldorf, Germany):

Kerkhoff H. J., President and CEO, redaktion@stahleisen.de

Журналы →  Chernye Metally →  2015 →  №8