Журналы →  CIS Iron and Steel Review →  2016 →  №2

CIS Iron and Steel Review



Название Technology of separation of carbon nanotubes from natural ferriferous manganese catalysts with the aid of agents made of acetylene alcohols
Авторы T. I. Yushina, I. O. Krylov, K. S. Popova, V. A. Vinnikov
Информация об авторах

National University of Science and Technology “MISIS”, Moscow, Russia:

T. I. Yushina, Candidate of Engineering Sciences, Professor, Acting Head of the Chair of Mineral and Waste Material Development and Processing, E-mail: yuti62@mail.ru
I. O. Krylov, Candidate of Engineering Sciences, Associate Professor
K. S. Popova, Candidate for a Master’s Degree
V. A. Vinnikov, Doctor of Physical and Mathematical Sciences, Professor, Head of the Chair of Physical Processes of Mining and Geocontrol

Название Influence of coke nut introduction in blast furnace charge on melting parameters
Авторы M. V. Chukin, S. K. Sibagatullin, A. S. Kharchenko, V. P. Chernov, G. N. Logachev
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

M. V. Chukin, Dr. Eng., Prof., First Vice-Rector on Science and Innovations, Dept. "Materials Processing Technologies"
S. K. Sibagatullin, Dr. Eng., Prof., Dept. "Foundry Production and Material Science"
A. S. Kharchenko, Cand. Eng., Ass. Prof., Dept. "Foundry Production and Material Science"
V. P. Chernov, Dr. Eng., Prof., Dept. "Foundry Production and Material Science"

 

Magnitogorsk Iron and Steel Works (Magnitogorsk, Russia):
G. N. Logachev, Engineer, Scientific and Technical Center

 

E-mail: 10skt@mail.ru; as.mgtu@mail.ru; tchernov42@mail.ru; lokkigrom@mail.ru

Название Nitrogen in Fe–Mn–Al–C–based steels
Авторы A. G. Svyazhin, V. E. Bazhenov, L. M. Kaputkina, I. V. Smarygina, V. E. Kindop
Информация об авторах

National University of Science and Technology “MISIS” (Moscow, Russia):

A. N. Svyazhin, Dr. Eng., Prof., Chief Researcher, svyazhin@misis.ru
V. E. Bazhenov, Cand. Eng., Junior Researcher, V.E.Bazhenov@gmail.com
L. M. Kaputkina, Dr. Phys.-Math., Prof., Chief Researcher, kaputkina@mail.ru
I. V. Smarygina, Cand. Eng., Associate Prof., smarygina.inga@yandex.ru
V. E. Kindop, Cand. Eng., Deputy Head of Science Department, vk@misis.ru

Название Substantiation of relation between anomalies in properties of steel melts (at ~0.5%С) and presence of intermediate phase ~Fe42C
Авторы K. Yu. Shakhnazarov, E. I. Pryakhin
Информация об авторах

St. Petersburg State Mining University (St. Petersburg, Russia):

K. Yu. Shakhnazarov, Cand. Eng., Ass. Prof., the Chair of Material Science and Technology of Art, Objectskaren812@yandex.ru

E. I. Pryakhin, Dr. Eng., Prof., Head of the Chair of Material Science and Technology of Art Objects, mthi@spmi.ru

Название Production of ingots with favourable location of internal defects owing to varying the features of solidification of its head part
Авторы D. V. Rutskii, N. A. Zyuban, S. B. Gamanyuk
Информация об авторах

Volgograd State Technical University (Volgograd, Russia)

D. V. Rutskii, Cand. Eng., Associate Professor, Department “Technology of materials”, rutskiy79@mail.ru
N. A. Zyuban, Dr. Eng., Professor, Head of Department “Technology of materials”, tecmat49@vstu.ru
S. B. Gamanyuk, Cand. Eng., Associate Professor, Department “Technology of materials”, gamanuk@mail.ru

Название Some aspects of launching the production of spring clips for rail fastenings.
Авторы I. Yu. Mezin, I. G. Gun, A. S. Limarev, I. A. Mikhailovskiy
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

I. Yu. Mezin, Dr. Eng., Prof., Dept. “Automobile Technology, Certification and Service”
I. G. Gun, Dr. Eng., Prof., Dept. “Automobile Technology, Certification and Service”
A. S. Limarev, Cand. Eng., Ass. Prof., Dept. “Automobile Technology, Certification and Service”
I. A. Mikhailovskiy, Dr. Eng., Prof., Dept. “Automobile Technology, Certification and Service”

E-mail: meziniy1@mail.ru; tssa@magtu.ru; aslimarev@mail.ru; tssa@magtu.ru

Название Some approaches to improve the resource efficiency of production of flat rolled steel
Автор M. I. Rumyantsev
Информация об авторе

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

M. I. Rumyantsev, Cand. Eng., Prof., mikhail.rumyantsev54@bk.ru, mir@magtu.ru

Название The mathematical model of the thick steel sheet flattening on the twelve-roller sheet-straightening machine. Message 1. Curvature of sheet
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS”, Moscow, Russia

V. N. Shinkin, DSc. Phys.-Math., Prof., shinkin-korolev@yandex.ru

Название The mathematical model of the thick steel sheet flattening on the twelve-roller sheet-straightening machine. Message 2. Forces and moments
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS”, Moscow, Russia:

V. N. Shinkin, DSc. Phys.-Math., Prof., shinkin-korolev@yandex.ru

Название New approach to development methodology of requirements of standards for metal products
Авторы M. A. Polyakova, G. Sh. Rubin, G. S. Gun, Yu. V. Danilova
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

M. A. Polyakova, Cand. Eng., Ass. Prof., Dept. “Materials Processing Technologies”, m.polyakova-64@mail.ru
G. Sh. Rubin, Cand. Eng., Ass. Prof., Dept. “Automobile Technology, Certification and Service”, rubingsh@gmail.com
G. S. Gun, Dr. Eng., Prof., Rector Advicer, Dept. “Materials Processing Technologies”, mgtu@magtu.ru
Yu. V. Danilova, Engineer, Dept. “Materials Processing Technologies”, j.v.danilova@inbox.ru

Журналы →  CIS Iron and Steel Review →  2016 →  №2